hack camera offset

Closes #13, but exposes the underlying issue at all times.

Reviewed-on: #14
Co-authored-by: Quaternions <krakow20@gmail.com>
Co-committed-by: Quaternions <krakow20@gmail.com>

engine/graphics/Cargo.toml

@@ -11,7 +11,7 @@ id = { version = "0.1.0", registry = "strafesnet" }
 strafesnet_common = { path = "../../lib/common", registry = "strafesnet" }
 strafesnet_session = { path = "../session", registry = "strafesnet" }
 strafesnet_settings = { path = "../settings", registry = "strafesnet" }
-wgpu = "27.0.0"
+wgpu = "28.0.0"
 
 [lints]
 workspace = true

engine/graphics/src/graphics.rs

@@ -616,7 +616,7 @@ impl GraphicsState{
 			address_mode_w:wgpu::AddressMode::ClampToEdge,
 			mag_filter:wgpu::FilterMode::Linear,
 			min_filter:wgpu::FilterMode::Linear,
-			mipmap_filter:wgpu::FilterMode::Linear,
+			mipmap_filter:wgpu::MipmapFilterMode::Linear,
 			..Default::default()
 		});
 		let repeat_sampler=device.create_sampler(&wgpu::SamplerDescriptor{
@@ -626,7 +626,7 @@ impl GraphicsState{
 			address_mode_w:wgpu::AddressMode::Repeat,
 			mag_filter:wgpu::FilterMode::Linear,
 			min_filter:wgpu::FilterMode::Linear,
-			mipmap_filter:wgpu::FilterMode::Linear,
+			mipmap_filter:wgpu::MipmapFilterMode::Linear,
 			anisotropy_clamp:16,
 			..Default::default()
 		});
@@ -754,7 +754,7 @@ impl GraphicsState{
 				&skybox_texture_bind_group_layout,
 				&model_bind_group_layout,
 			],
-			push_constant_ranges:&[],
+			immediate_size:0,
 		});
 		let sky_pipeline_layout=device.create_pipeline_layout(&wgpu::PipelineLayoutDescriptor{
 			label:None,
@@ -762,7 +762,7 @@ impl GraphicsState{
 				&camera_bind_group_layout,
 				&skybox_texture_bind_group_layout,
 			],
-			push_constant_ranges:&[],
+			immediate_size:0,
 		});
 
 		// Create the render pipelines
@@ -793,7 +793,7 @@ impl GraphicsState{
 				bias:wgpu::DepthBiasState::default(),
 			}),
 			multisample:wgpu::MultisampleState::default(),
-			multiview:None,
+			multiview_mask:None,
 			cache:None,
 		});
 		let model_pipeline=device.create_render_pipeline(&wgpu::RenderPipelineDescriptor{
@@ -828,7 +828,7 @@ impl GraphicsState{
 				bias:wgpu::DepthBiasState::default(),
 			}),
 			multisample:wgpu::MultisampleState::default(),
-			multiview:None,
+			multiview_mask:None,
 			cache:None,
 		});
 
@@ -880,7 +880,7 @@ impl GraphicsState{
 			camera_buf,
 			models:Vec::new(),
 			depth_view,
-			staging_belt:wgpu::util::StagingBelt::new(0x100),
+			staging_belt:wgpu::util::StagingBelt::new(device.clone(),0x100),
 			bind_group_layouts:GraphicsBindGroupLayouts{model:model_bind_group_layout},
 			samplers:GraphicsSamplers{repeat:repeat_sampler},
 			temp_squid_texture_view:squid_texture_view,
@@ -918,7 +918,6 @@ impl GraphicsState{
 				&self.camera_buf,
 				0,
 				wgpu::BufferSize::new((camera_uniforms.len() * 4) as wgpu::BufferAddress).unwrap(),
-				device,
 			)
 			.copy_from_slice(bytemuck::cast_slice(&camera_uniforms));
 		//This code only needs to run when the uniforms change
@@ -965,6 +964,7 @@ impl GraphicsState{
 				}),
 				timestamp_writes:Default::default(),
 				occlusion_query_set:Default::default(),
+				multiview_mask:None,
 			});
 
 			rpass.set_bind_group(0,&self.bind_groups.camera,&[]);

engine/physics/src/face_crawler.rs

@@ -21,12 +21,6 @@ impl<M:MeshQuery> CrawlResult<M>{
 			CrawlResult::Hit(face,time)=>Some((face,time)),
 		}
 	}
-	pub fn miss(self)->Option<FEV<M>>{
-		match self{
-			CrawlResult::Miss(fev)=>Some(fev),
-			CrawlResult::Hit(_,_)=>None,
-		}
-	}
 }
 
 // TODO: move predict_collision_face_out algorithm in here or something

engine/physics/src/lib.rs

@@ -1,7 +1,8 @@
 mod body;
-mod push_solve;
 mod face_crawler;
 mod model;
+mod push_solve;
+mod minimum_difference;
 
 pub mod physics;
 

engine/physics/src/minimum_difference.rs

@@ -0,0 +1,895 @@
+use strafesnet_common::integer::vec3;
+use strafesnet_common::integer::vec3::Vector3;
+use strafesnet_common::integer::{Fixed,Planar64,Planar64Vec3};
+
+use crate::model::{DirectedEdge,FEV,MeshQuery};
+// TODO: remove mesh invert
+use crate::model::{MinkowskiMesh,MinkowskiVert};
+
+// This algorithm is based on Lua code
+// written by Trey Reynolds in 2021
+
+type Simplex<const N:usize,Vert>=[Vert;N];
+#[derive(Clone,Copy)]
+enum Simplex1_3<Vert>{
+	Simplex1(Simplex<1,Vert>),
+	Simplex2(Simplex<2,Vert>),
+	Simplex3(Simplex<3,Vert>),
+}
+impl<Vert> Simplex1_3<Vert>{
+	fn push_front(self,v:Vert)->Simplex2_4<Vert>{
+		match self{
+			Simplex1_3::Simplex1([v0])=>Simplex2_4::Simplex2([v,v0]),
+			Simplex1_3::Simplex2([v0,v1])=>Simplex2_4::Simplex3([v,v0,v1]),
+			Simplex1_3::Simplex3([v0,v1,v2])=>Simplex2_4::Simplex4([v,v0,v1,v2]),
+		}
+	}
+}
+#[derive(Clone,Copy)]
+enum Simplex2_4<Vert>{
+	Simplex2(Simplex<2,Vert>),
+	Simplex3(Simplex<3,Vert>),
+	Simplex4(Simplex<4,Vert>),
+}
+
+/*
+local function absDet(r, u, v, w)
+	if w then
+		return math.abs((u - r):Cross(v - r):Dot(w - r))
+	elseif v then
+		return (u - r):Cross(v - r).magnitude
+	elseif u then
+		return (u - r).magnitude
+	else
+		return 1
+	end
+end
+*/
+impl<Vert> Simplex2_4<Vert>{
+	fn det_is_zero<M:MeshQuery<Vert=Vert>>(self,mesh:&M)->bool{
+		match self{
+			Self::Simplex4([p0,p1,p2,p3])=>{
+				let p0=mesh.vert(p0);
+				let p1=mesh.vert(p1);
+				let p2=mesh.vert(p2);
+				let p3=mesh.vert(p3);
+				(p1-p0).cross(p2-p0).dot(p3-p0)==Fixed::ZERO
+			},
+			Self::Simplex3([p0,p1,p2])=>{
+				let p0=mesh.vert(p0);
+				let p1=mesh.vert(p1);
+				let p2=mesh.vert(p2);
+				(p1-p0).cross(p2-p0)==vec3::zero()
+			},
+			Self::Simplex2([p0,p1])=>{
+				let p0=mesh.vert(p0);
+				let p1=mesh.vert(p1);
+				p1-p0==vec3::zero()
+			}
+		}
+	}
+}
+
+/*
+local function choosePerpendicularDirection(d)
+	local x, y, z = d.x, d.y, d.z
+	local best = math.min(x*x, y*y, z*z)
+	if x*x == best then
+		return Vector3.new(y*y + z*z, -x*y, -x*z)
+	elseif y*y == best then
+		return Vector3.new(-x*y, x*x + z*z, -y*z)
+	else
+		return Vector3.new(-x*z, -y*z, x*x + y*y)
+	end
+end
+*/
+fn choose_perpendicular_direction(d:Planar64Vec3)->Planar64Vec3{
+	let x=d.x.abs();
+	let y=d.y.abs();
+	let z=d.z.abs();
+	if x<y&&x<z{
+		Vector3::new([Fixed::ZERO,-d.z,d.y])
+	}else if y<z{
+		Vector3::new([d.z,Fixed::ZERO,-d.x])
+	}else{
+		Vector3::new([-d.y,d.x,Fixed::ZERO])
+	}
+}
+
+const fn choose_any_direction()->Planar64Vec3{
+	vec3::X
+}
+
+fn narrow_dir2(dir:Vector3<Fixed<2,64>>)->Planar64Vec3{
+	if dir==vec3::zero(){
+		return dir.narrow_1().unwrap();
+	}
+	let x=dir.x.as_bits().unsigned_abs().bits();
+	let y=dir.y.as_bits().unsigned_abs().bits();
+	let z=dir.z.as_bits().unsigned_abs().bits();
+	let big=x.max(y).max(z);
+	const MAX_BITS:u32=64+31;
+	if MAX_BITS<big{
+		dir>>(big-MAX_BITS)
+	}else{
+		dir
+	}.narrow_1().unwrap()
+}
+fn narrow_dir3(dir:Vector3<Fixed<3,96>>)->Planar64Vec3{
+	if dir==vec3::zero(){
+		return dir.narrow_1().unwrap();
+	}
+	let x=dir.x.as_bits().unsigned_abs().bits();
+	let y=dir.y.as_bits().unsigned_abs().bits();
+	let z=dir.z.as_bits().unsigned_abs().bits();
+	let big=x.max(y).max(z);
+	const MAX_BITS:u32=96+31;
+	if MAX_BITS<big{
+		dir>>(big-MAX_BITS)
+	}else{
+		dir
+	}.narrow_1().unwrap()
+}
+
+fn reduce1<M:MeshQuery>(
+	[v0]:Simplex<1,M::Vert>,
+	mesh:&M,
+	point:Planar64Vec3,
+)->Reduced<M::Vert>{
+	// --debug.profilebegin("reduceSimplex0")
+	// local a = a1 - a0
+	let p0=mesh.vert(v0);
+
+	// local p = -a
+	let p=-(p0+point);
+
+	// local direction = p
+	let mut dir=p;
+
+	// if direction.magnitude == 0 then
+	// 	direction = chooseAnyDirection()
+	if dir==vec3::zero(){
+		dir=choose_any_direction();
+	}
+
+	// return direction, a0, a1
+	Reduced{
+		dir,
+		simplex:Simplex1_3::Simplex1([v0]),
+	}
+}
+
+// local function reduceSimplex1(a0, a1, b0, b1)
+fn reduce2<M:MeshQuery>(
+	[v0,v1]:Simplex<2,M::Vert>,
+	mesh:&M,
+	point:Planar64Vec3,
+)->Reduced<M::Vert>{
+	// --debug.profilebegin("reduceSimplex1")
+	// local a = a1 - a0
+	// local b = b1 - b0
+	let p0=mesh.vert(v0);
+	let p1=mesh.vert(v1);
+
+	// local p = -a
+	// local u = b - a
+	let p=-(p0+point);
+	let u=p1-p0;
+
+	// -- modify to take into account the radiuses
+	// local p_u = p:Dot(u)
+	let p_u=p.dot(u);
+
+	// if p_u >= 0 then
+	if !p_u.is_negative(){
+		// local direction = u:Cross(p):Cross(u)
+		let direction=u.cross(p).cross(u);
+
+		// if direction.magnitude == 0 then
+		if direction==vec3::zero(){
+			return Reduced{
+				dir:choose_perpendicular_direction(u),
+				simplex:Simplex1_3::Simplex2([v0,v1]),
+			};
+		}
+
+		// -- modify the direction to take into account a0R and b0R
+		// return direction, a0, a1, b0, b1
+		return Reduced{
+			dir:narrow_dir3(direction),
+			simplex:Simplex1_3::Simplex2([v0,v1]),
+		};
+	}
+
+	// local direction = p
+	let mut dir=p;
+
+	// if direction.magnitude == 0 then
+	if dir==vec3::zero(){
+		dir=choose_perpendicular_direction(u);
+	}
+
+	// return direction, a0, a1
+	Reduced{
+		dir,
+		simplex:Simplex1_3::Simplex1([v0]),
+	}
+}
+
+// local function reduceSimplex2(a0, a1, b0, b1, c0, c1)
+fn reduce3<M:MeshQuery>(
+	[v0,mut v1,v2]:Simplex<3,M::Vert>,
+	mesh:&M,
+	point:Planar64Vec3,
+)->Reduced<M::Vert>{
+	// --debug.profilebegin("reduceSimplex2")
+	// local a = a1 - a0
+	// local b = b1 - b0
+	// local c = c1 - c0
+	let p0=mesh.vert(v0);
+	let p1=mesh.vert(v1);
+	let p2=mesh.vert(v2);
+
+	// local p = -a
+	// local u = b - a
+	// local v = c - a
+	let p=-(p0+point);
+	let mut u=p1-p0;
+	let v=p2-p0;
+
+	// local uv = u:Cross(v)
+	// local up = u:Cross(p)
+	// local pv = p:Cross(v)
+	// local uv_up = uv:Dot(up)
+	// local uv_pv = uv:Dot(pv)
+	let mut uv=u.cross(v);
+	let mut up=u.cross(p);
+	let pv=p.cross(v);
+	let uv_up=uv.dot(up);
+	let uv_pv=uv.dot(pv);
+
+	// if uv_up >= 0 and uv_pv >= 0 then
+	if !uv_up.is_negative()&&!uv_pv.is_negative(){
+		// local uvp = uv:Dot(p)
+		let uvp=uv.dot(p);
+
+		// local direction = uvp < 0 and -uv or uv
+		let direction=if uvp.is_negative(){
+			-uv
+		}else{
+			uv
+		};
+
+		// return direction, a0, a1, b0, b1, c0, c1
+		return Reduced{
+			dir:narrow_dir2(direction),
+			simplex:Simplex1_3::Simplex3([v0,v1,v2]),
+		};
+	}
+
+	// local u_u = u:Dot(u)
+	// local v_v = v:Dot(v)
+	// local uDist = uv_up/(u_u*v.magnitude)
+	// local vDist = uv_pv/(v_v*u.magnitude)
+	// local minDist2 = math.min(uDist, vDist)
+	let u_dist=uv_up*v.length();
+	let v_dist=uv_pv*u.length();
+
+	// if vDist == minDist2 then
+	if v_dist<u_dist{
+		u=v;
+		up=-pv;
+		uv=-uv;
+		// b0 = c0
+		// b1 = c1
+		v1=v2;
+	}
+
+	// local p_u = p:Dot(u)
+	let p_u=p.dot(u);
+
+	// if p_u >= 0 then
+	if !p_u.is_negative(){
+		// local direction = up:Cross(u)
+		let direction=up.cross(u);
+		// if direction.magnitude == 0 then
+		if direction==vec3::zero(){
+			// direction = uv
+			return Reduced{
+				dir:narrow_dir2(uv),
+				simplex:Simplex1_3::Simplex2([v0,v1]),
+			};
+		}
+
+		// return direction, a0, a1, b0, b1
+		return Reduced{
+			dir:narrow_dir3(direction),
+			simplex:Simplex1_3::Simplex2([v0,v1]),
+		};
+	}
+
+	// local direction = p
+	let dir=p;
+	// if direction.magnitude == 0 then
+	if dir==vec3::zero(){
+		// direction = uv
+		return Reduced{
+			dir:narrow_dir2(uv),
+			simplex:Simplex1_3::Simplex1([v0]),
+		};
+	}
+	// return direction, a0, a0
+	Reduced{
+		dir,
+		simplex:Simplex1_3::Simplex1([v0]),
+	}
+}
+
+// local function reduceSimplex3(a0, a1, b0, b1, c0, c1, d0, d1)
+fn reduce4<M:MeshQuery>(
+	[v0,mut v1,mut v2,v3]:Simplex<4,M::Vert>,
+	mesh:&M,
+	point:Planar64Vec3,
+)->Reduce<M::Vert>{
+	// --debug.profilebegin("reduceSimplex3")
+	// local a = a1 - a0
+	// local b = b1 - b0
+	// local c = c1 - c0
+	// local d = d1 - d0
+	let p0=mesh.vert(v0);
+	let p1=mesh.vert(v1);
+	let p2=mesh.vert(v2);
+	let p3=mesh.vert(v3);
+
+	// local p = -a
+	// local u = b - a
+	// local v = c - a
+	// local w = d - a
+	let p=-(p0+point);
+	let mut u=p1-p0;
+	let mut v=p2-p0;
+	let w=p3-p0;
+
+	// local uv = u:Cross(v)
+	// local vw = v:Cross(w)
+	// local wu = w:Cross(u)
+	// local uvw = uv:Dot(w)
+	// local pvw = vw:Dot(p)
+	// local upw = wu:Dot(p)
+	// local uvp = uv:Dot(p)
+	let mut uv=u.cross(v);
+	let vw=v.cross(w);
+	let wu=w.cross(u);
+	let uv_w=uv.dot(w);
+	let pv_w=vw.dot(p);
+	let up_w=wu.dot(p);
+	let uv_p=uv.dot(p);
+
+	// if pvw/uvw >= 0 and upw/uvw >= 0 and uvp/uvw >= 0 then
+	if !pv_w.div_sign(uv_w).is_negative()
+	 &&!up_w.div_sign(uv_w).is_negative()
+	 &&!uv_p.div_sign(uv_w).is_negative(){
+		// origin is contained, this is a positive detection
+		// local direction = Vector3.new(0, 0, 0)
+		// return direction, a0, a1, b0, b1, c0, c1, d0, d1
+		return Reduce::Escape([v0,v1,v2,v3]);
+	}
+
+	// local uvwSign = uvw < 0 and -1 or uvw > 0 and 1 or 0
+	// local uvDist = uvp*uvwSign/uv.magnitude
+	// local vwDist = pvw*uvwSign/vw.magnitude
+	// local wuDist = upw*uvwSign/wu.magnitude
+	// local minDist3 = math.min(uvDist, vwDist, wuDist)
+	let uv_dist=uv_p.mul_sign(uv_w);
+	let vw_dist=pv_w.mul_sign(uv_w);
+	let wu_dist=up_w.mul_sign(uv_w);
+	let wu_len=wu.length();
+	let uv_len=uv.length();
+	let vw_len=vw.length();
+
+	if vw_dist*wu_len<wu_dist*vw_len{
+		// if vwDist == minDist3 then
+		if vw_dist*uv_len<uv_dist*vw_len{
+			(u,v)=(v,w);
+			uv=vw;
+			// uv_p=pv_w; // unused
+			// b0, c0 = c0, d0
+			// b1, c1 = c1, d1
+			(v1,v2)=(v2,v3);
+		}
+	}else{
+		// elseif wuDist == minDist3 then
+		if wu_dist*uv_len<uv_dist*wu_len{
+			(u,v)=(w,u);
+			uv=wu;
+			// uv_p=up_w; // unused
+			// b0, c0 = d0, b0
+			// b1, c1 = d1, b1
+			// before [a,b,c,d]
+			(v1,v2)=(v3,v1);
+			// after [a,d,b]
+		}
+	}
+
+	// local up = u:Cross(p)
+	// local pv = p:Cross(v)
+	// local uv_up = uv:Dot(up)
+	// local uv_pv = uv:Dot(pv)
+	let mut up=u.cross(p);
+	let pv=p.cross(v);
+	let uv_up=uv.dot(up);
+	let uv_pv=uv.dot(pv);
+
+	// if uv_up >= 0 and uv_pv >= 0 then
+	if !uv_up.is_negative()&&!uv_pv.is_negative(){
+		// local direction = uvw < 0 and uv or -uv
+		// return direction, a0, a1, b0, b1, c0, c1
+		let dir=if uv_w.is_negative(){
+			narrow_dir2(uv)
+		}else{
+			narrow_dir2(-uv)
+		};
+		return Reduce::Reduced(Reduced{
+			dir,
+			simplex:Simplex1_3::Simplex3([v0,v1,v2]),
+		});
+	}
+
+	// local u_u = u:Dot(u)
+	// local v_v = v:Dot(v)
+	// local uDist = uv_up/(u_u*v.magnitude)
+	// local vDist = uv_pv/(v_v*u.magnitude)
+	// local minDist2 = math.min(uDist, vDist)
+	let u_dist=uv_up*v.length();
+	let v_dist=uv_pv*u.length();
+
+	// if vDist == minDist2 then
+	if v_dist<u_dist{
+		u=v;
+		up=-pv;
+		uv=-uv;
+		// b0 = c0
+		// b1 = c1
+		v1=v2;
+	}
+
+	// local p_u = p:Dot(u)
+	let p_u=p.dot(u);
+
+	// if p_u >= 0 then
+	if !p_u.is_negative(){
+		// local direction = up:Cross(u)
+		let direction=up.cross(u);
+		// if direction.magnitude == 0 then
+		if direction==vec3::zero(){
+			// direction = uvw < 0 and uv or -uv
+			// return direction, a0, a1, b0, b1
+			let dir=if uv_w.is_negative(){
+				narrow_dir2(uv)
+			}else{
+				narrow_dir2(-uv)
+			};
+			return Reduce::Reduced(Reduced{
+				dir,
+				simplex:Simplex1_3::Simplex2([v0,v1]),
+			});
+		}
+
+		// return direction, a0, a1, b0, b1
+		return Reduce::Reduced(Reduced{
+			dir:narrow_dir3(direction),
+			simplex:Simplex1_3::Simplex2([v0,v1]),
+		});
+	}
+
+	// local direction = p
+	let dir=p;
+	// if direction.magnitude == 0 then
+	if dir==vec3::zero(){
+		// direction = uvw < 0 and uv or -uv
+		let dir=if uv_w.is_negative(){
+			narrow_dir2(uv)
+		}else{
+			narrow_dir2(-uv)
+		};
+		return Reduce::Reduced(Reduced{
+			dir,
+			simplex:Simplex1_3::Simplex1([v0]),
+		});
+	}
+
+	// return direction, a0, a1
+	Reduce::Reduced(Reduced{
+		dir,
+		simplex:Simplex1_3::Simplex1([v0]),
+	})
+}
+
+struct Reduced<Vert>{
+	dir:Planar64Vec3,
+	simplex:Simplex1_3<Vert>,
+}
+
+enum Reduce<Vert>{
+	Escape(Simplex<4,Vert>),
+	Reduced(Reduced<Vert>),
+}
+
+impl<Vert> Simplex2_4<Vert>{
+	fn reduce<M:MeshQuery<Vert=Vert>>(self,mesh:&M,point:Planar64Vec3)->Reduce<Vert>{
+		match self{
+			Self::Simplex2(simplex)=>Reduce::Reduced(reduce2(simplex,mesh,point)),
+			Self::Simplex3(simplex)=>Reduce::Reduced(reduce3(simplex,mesh,point)),
+			Self::Simplex4(simplex)=>reduce4(simplex,mesh,point),
+		}
+	}
+}
+
+//infinity fev algorithm state transition
+#[derive(Debug)]
+enum Transition<Vert>{
+	Done,//found closest vert, no edges are better
+	Vert(Vert),//transition to vert
+}
+enum EV<M:MeshQuery>{
+	Vert(M::Vert),
+	Edge(<M::Edge as DirectedEdge>::UndirectedEdge),
+}
+impl<M:MeshQuery> From<EV<M>> for FEV<M>{
+	fn from(value:EV<M>)->Self{
+		match value{
+			EV::Vert(minkowski_vert)=>FEV::Vert(minkowski_vert),
+			EV::Edge(minkowski_edge)=>FEV::Edge(minkowski_edge),
+		}
+	}
+}
+
+trait Contains{
+	fn contains(&self,point:Planar64Vec3)->bool;
+}
+
+// convenience type to check if a point is within some threshold of a plane.
+struct ThickPlane{
+	point:Planar64Vec3,
+	normal:Vector3<Fixed<2,64>>,
+	epsilon:Fixed<3,96>,
+}
+impl ThickPlane{
+	fn new<M:MeshQuery>(mesh:&M,[v0,v1,v2]:Simplex<3,M::Vert>)->Self{
+		let p0=mesh.vert(v0);
+		let p1=mesh.vert(v1);
+		let p2=mesh.vert(v2);
+		let point=p0;
+		let normal=(p1-p0).cross(p2-p0);
+		// Allow ~ 2*sqrt(3) units of thickness on the plane
+		// This is to account for the variance of two voxels across the longest diagonal
+		let epsilon=(normal.length()*(Planar64::EPSILON*3)).wrap_3();
+		Self{point,normal,epsilon}
+	}
+}
+impl Contains for ThickPlane{
+	fn contains(&self,point:Planar64Vec3)->bool{
+		(point-self.point).dot(self.normal).abs()<=self.epsilon
+	}
+}
+
+struct ThickLine{
+	point:Planar64Vec3,
+	dir:Planar64Vec3,
+	epsilon:Fixed<4,128>,
+}
+impl ThickLine{
+	fn new<M:MeshQuery>(mesh:&M,[v0,v1]:Simplex<2,M::Vert>)->Self{
+		let p0=mesh.vert(v0);
+		let p1=mesh.vert(v1);
+		let point=p0;
+		let dir=p1-p0;
+		// Allow ~ 2*sqrt(3) units of thickness on the plane
+		// This is to account for the variance of two voxels across the longest diagonal
+		let epsilon=(dir.length_squared()*(Planar64::EPSILON*3)).widen_4();
+		Self{point,dir,epsilon}
+	}
+}
+impl Contains for ThickLine{
+	fn contains(&self,point:Planar64Vec3)->bool{
+		(point-self.point).cross(self.dir).length_squared()<=self.epsilon
+	}
+}
+
+struct EVFinder<'a,M,C>{
+	mesh:&'a M,
+	constraint:C,
+	best_distance_squared:Fixed<2,64>,
+}
+
+impl<M:MeshQuery,C:Contains> EVFinder<'_,M,C>{
+	fn next_transition_vert(&mut self,vert_id:M::Vert,point:Planar64Vec3)->Transition<M::Vert>{
+		let mut best_transition=Transition::Done;
+		for &directed_edge_id in self.mesh.vert_edges(vert_id).as_ref(){
+			//test if this edge's opposite vertex closer
+			let edge_verts=self.mesh.edge_verts(directed_edge_id.as_undirected());
+			//select opposite vertex
+			let test_vert_id=edge_verts.as_ref()[directed_edge_id.parity() as usize];
+			let test_pos=self.mesh.vert(test_vert_id);
+			let diff=point-test_pos;
+			let distance_squared=diff.dot(diff);
+			// ensure test_vert_id is coplanar to simplex
+			if distance_squared<self.best_distance_squared&&self.constraint.contains(test_pos){
+				best_transition=Transition::Vert(test_vert_id);
+				self.best_distance_squared=distance_squared;
+			}
+		}
+		best_transition
+	}
+	fn final_ev(&mut self,vert_id:M::Vert,point:Planar64Vec3)->EV<M>{
+		let mut best_transition=EV::Vert(vert_id);
+		let vert_pos=self.mesh.vert(vert_id);
+		let diff=point-vert_pos;
+		for &directed_edge_id in self.mesh.vert_edges(vert_id).as_ref(){
+			//test if this edge is closer
+			let edge_verts=self.mesh.edge_verts(directed_edge_id.as_undirected());
+			let test_vert_id=edge_verts.as_ref()[directed_edge_id.parity() as usize];
+			let test_pos=self.mesh.vert(test_vert_id);
+			let edge_n=test_pos-vert_pos;
+			let d=edge_n.dot(diff);
+			//test the edge
+			let edge_nn=edge_n.dot(edge_n);
+			// ensure edge contains closest point and directed_edge_id is coplanar to simplex
+			if !d.is_negative()&&d<=edge_nn&&self.constraint.contains(test_pos){
+				let distance_squared={
+					let c=diff.cross(edge_n);
+					//wrap for speed
+					(c.dot(c)/edge_nn).divide().wrap_2()
+				};
+				if distance_squared<=self.best_distance_squared{
+					best_transition=EV::Edge(directed_edge_id.as_undirected());
+					self.best_distance_squared=distance_squared;
+				}
+			}
+		}
+		best_transition
+	}
+	fn crawl_boundaries(&mut self,mut vert_id:M::Vert,point:Planar64Vec3)->EV<M>{
+		loop{
+			match self.next_transition_vert(vert_id,point){
+				Transition::Done=>return self.final_ev(vert_id,point),
+				Transition::Vert(new_vert_id)=>vert_id=new_vert_id,
+			}
+		}
+	}
+}
+/// This function drops a vertex down to an edge or a face if the path from infinity did not cross any vertex-edge boundaries but the point is supposed to have already crossed a boundary down from a vertex
+fn crawl_to_closest_ev<M:MeshQuery>(mesh:&M,simplex:Simplex<2,M::Vert>,point:Planar64Vec3)->EV<M>{
+	// naively start at the closest vertex
+	// the closest vertex is not necessarily the one with the fewest boundary hops
+	// but it doesn't matter, we will get there regardless.
+	let (vert_id,best_distance_squared)=simplex.into_iter().map(|vert_id|{
+		let diff=point-mesh.vert(vert_id);
+		(vert_id,diff.dot(diff))
+	}).min_by_key(|&(_,d)|d).unwrap();
+
+	let constraint=ThickLine::new(mesh,simplex);
+	let mut finder=EVFinder{constraint,mesh,best_distance_squared};
+	//start on any vertex
+	//cross uncrossable vertex-edge boundaries until you find the closest vertex or edge
+	//cross edge-face boundary if it's uncrossable
+	finder.crawl_boundaries(vert_id,point)
+}
+
+/// This function drops a vertex down to an edge or a face if the path from infinity did not cross any vertex-edge boundaries but the point is supposed to have already crossed a boundary down from a vertex
+fn crawl_to_closest_fev<'a>(mesh:&MinkowskiMesh<'a>,simplex:Simplex<3,MinkowskiVert>,point:Planar64Vec3)->FEV::<MinkowskiMesh<'a>>{
+	// naively start at the closest vertex
+	// the closest vertex is not necessarily the one with the fewest boundary hops
+	// but it doesn't matter, we will get there regardless.
+	let (vert_id,best_distance_squared)=simplex.into_iter().map(|vert_id|{
+		let diff=point-mesh.vert(vert_id);
+		(vert_id,diff.dot(diff))
+	}).min_by_key(|&(_,d)|d).unwrap();
+
+	let constraint=ThickPlane::new(mesh,simplex);
+	let mut finder=EVFinder{constraint,mesh,best_distance_squared};
+	//start on any vertex
+	//cross uncrossable vertex-edge boundaries until you find the closest vertex or edge
+	//cross edge-face boundary if it's uncrossable
+	match finder.crawl_boundaries(vert_id,point){
+		//if a vert is returned, it is the closest point to the infinity point
+		EV::Vert(vert_id)=>FEV::Vert(vert_id),
+		EV::Edge(edge_id)=>{
+			//cross to face if we are on the wrong side
+			let edge_n=mesh.edge_n(edge_id);
+			// point is multiplied by two because vert_sum sums two vertices.
+			let delta_pos=point*2-{
+				let &[v0,v1]=mesh.edge_verts(edge_id).as_ref();
+				mesh.vert(v0)+mesh.vert(v1)
+			};
+			for (i,&face_id) in mesh.edge_faces(edge_id).as_ref().iter().enumerate(){
+				//test if this face is closer
+				let (face_n,d)=mesh.face_nd(face_id);
+				//if test point is behind face, the face is invalid
+				// TODO: find out why I thought of this backwards
+				if !(face_n.dot(point)-d).is_positive(){
+					continue;
+				}
+				//edge-face boundary nd, n facing out of the face towards the edge
+				let boundary_n=face_n.cross(edge_n)*(i as i64*2-1);
+				let boundary_d=boundary_n.dot(delta_pos);
+				//is test point behind edge, i.e. contained in the face
+				if !boundary_d.is_positive(){
+					//both faces cannot pass this condition, return early if one does.
+					return FEV::Face(face_id);
+				}
+			}
+			FEV::Edge(edge_id)
+		},
+	}
+}
+
+pub fn closest_fev_not_inside<'a>(mesh:&MinkowskiMesh<'a>,point:Planar64Vec3)->Option<FEV<MinkowskiMesh<'a>>>{
+	const ENABLE_FAST_FAIL:bool=false;
+	// TODO: remove mesh negation
+	minimum_difference::<ENABLE_FAST_FAIL,_,_>(&-mesh,point,
+		// on_exact
+		|is_intersecting,simplex|{
+			if is_intersecting{
+				return None;
+			}
+			// Convert simplex to FEV
+			// Vertices must be inverted since the mesh is inverted
+			Some(match simplex{
+				Simplex1_3::Simplex1([v0])=>FEV::Vert(-v0),
+				Simplex1_3::Simplex2([v0,v1])=>{
+					// invert
+					let (v0,v1)=(-v0,-v1);
+					crawl_to_closest_ev(mesh,[v0,v1],point).into()
+				},
+				Simplex1_3::Simplex3([v0,v1,v2])=>{
+					// invert
+					let (v0,v1,v2)=(-v0,-v1,-v2);
+					// Shimmy to the side until you find a face that contains the closest point
+					// it's ALWAYS representable as a face, but this algorithm may
+					// return E or V in edge cases but I don't think that will break the face crawler
+					crawl_to_closest_fev(mesh,[v0,v1,v2],point)
+				},
+			})
+		},
+		// on_escape
+		|_simplex|{
+			// intersection is guaranteed at this point
+			// local norm, dist, u0, u1, v0, v1, w0, w1 = expand(queryP, queryQ, a0, a1, b0, b1, c0, c1, d0, d1, 1e-5)
+			// let simplex=refine_to_exact(mesh,simplex);
+			None
+		},
+		// fast_fail value is irrelevant and will never be returned!
+		||unreachable!()
+	)
+}
+
+pub fn contains_point(mesh:&MinkowskiMesh<'_>,point:Planar64Vec3)->bool{
+	const ENABLE_FAST_FAIL:bool=true;
+	// TODO: remove mesh negation
+	minimum_difference::<ENABLE_FAST_FAIL,_,_>(&-mesh,point,
+		// on_exact
+		|is_intersecting,_simplex|{
+			is_intersecting
+		},
+		// on_escape
+		|_simplex|{
+			// intersection is guaranteed at this point
+			true
+		},
+		// fast_fail value
+		||false
+	)
+}
+
+// local function minimumDifference(
+// 	queryP, radiusP,
+// 	queryQ, radiusQ,
+// 	exitRadius, testIntersection
+// )
+fn minimum_difference<const ENABLE_FAST_FAIL:bool,T,M:MeshQuery>(
+	mesh:&M,
+	point:Planar64Vec3,
+	on_exact:impl FnOnce(bool,Simplex1_3<M::Vert>)->T,
+	on_escape:impl FnOnce(Simplex<4,M::Vert>)->T,
+	on_fast_fail:impl FnOnce()->T,
+)->T{
+	// local initialAxis = queryQ() - queryP()
+	// local new_point_p = queryP(initialAxis)
+	// local new_point_q = queryQ(-initialAxis)
+	// local direction, a0, a1, b0, b1, c0, c1, d0, d1
+	let mut initial_axis=mesh.hint_point()+point;
+	// degenerate case
+	if initial_axis==vec3::zero(){
+		initial_axis=choose_any_direction();
+	}
+	let last_point=mesh.farthest_vert(-initial_axis);
+	// this represents the 'a' value in the commented code
+	let mut last_pos=mesh.vert(last_point);
+	let Reduced{dir:mut direction,simplex:mut simplex_small}=reduce1([last_point],mesh,point);
+
+	// exitRadius = testIntersection and 0 or exitRadius or 1/0
+	// for _ = 1, 100 do
+	loop{
+		// new_point_p = queryP(-direction)
+		// new_point_q = queryQ(direction)
+		// local next_point = new_point_q - new_point_p
+		let next_point=mesh.farthest_vert(direction);
+		let next_pos=mesh.vert(next_point);
+
+		// if -direction:Dot(next_point) > (exitRadius + radiusP + radiusQ)*direction.magnitude then
+		if ENABLE_FAST_FAIL&&direction.dot(next_pos+point).is_negative(){
+			return on_fast_fail();
+		}
+
+		let simplex_big=simplex_small.push_front(next_point);
+
+		// if
+		// 	direction:Dot(next_point - a) <= 0 or
+		// 	absDet(next_point, a, b, c) < 1e-6
+		if !direction.dot(next_pos-last_pos).is_positive()
+		||simplex_big.det_is_zero(mesh){
+			// Found enough information to compute the exact closest point.
+			// local norm = direction.unit
+			// local dist = a:Dot(norm)
+			// local hits = -dist < radiusP + radiusQ
+			let is_intersecting=(last_pos+point).dot(direction).is_positive();
+			return on_exact(is_intersecting,simplex_small);
+		}
+
+		// direction, a0, a1, b0, b1, c0, c1, d0, d1 = reduceSimplex(new_point_p, new_point_q, a0, a1, b0, b1, c0, c1)
+		match simplex_big.reduce(mesh,point){
+			// if a and b and c and d then
+			Reduce::Escape(simplex)=>{
+				// Enough information to conclude that the meshes are intersecting.
+				// Topology information is computed if needed.
+				return on_escape(simplex);
+			},
+			Reduce::Reduced(reduced)=>{
+				direction=reduced.dir;
+				simplex_small=reduced.simplex;
+			},
+		}
+
+		// next loop this will be a
+		last_pos=next_pos;
+	}
+}
+
+#[cfg(test)]
+mod test{
+	use super::*;
+    use crate::model::{PhysicsMesh,PhysicsMeshView};
+
+    fn mesh_contains_point(mesh:PhysicsMeshView<'_>,point:Planar64Vec3)->bool{
+		const ENABLE_FAST_FAIL:bool=true;
+		// TODO: remove mesh negation
+		minimum_difference::<ENABLE_FAST_FAIL,_,_>(&mesh,point,
+			// on_exact
+			|is_intersecting,_simplex|{
+				is_intersecting
+			},
+			// on_escape
+			|_simplex|{
+				// intersection is guaranteed at this point
+				true
+			},
+			// fast_fail value
+			||false
+		)
+	}
+
+	#[test]
+	fn test_cube_points(){
+		let mesh=PhysicsMesh::unit_cube();
+		let mesh_view=mesh.complete_mesh_view();
+		for x in -2..=2{
+			for y in -2..=2{
+				for z in -2..=2{
+					let point=vec3::int(x,y,z)>>1;
+					assert!(mesh_contains_point(mesh_view,point),"Mesh did not contain point {point}");
+				}
+			}
+		}
+	}
+}

engine/physics/src/model.rs

@@ -92,6 +92,7 @@ pub trait MeshQuery{
 	}
 	/// This must return a point inside the mesh.
 	fn hint_point(&self)->Planar64Vec3;
+	fn farthest_vert(&self,dir:Planar64Vec3)->Self::Vert;
 	fn vert(&self,vert_id:Self::Vert)->Planar64Vec3;
 	fn face_nd(&self,face_id:Self::Face)->(Self::Normal,Self::Offset);
 	fn face_edges(&self,face_id:Self::Face)->impl AsRef<[Self::Edge]>;
@@ -102,17 +103,21 @@ pub trait MeshQuery{
 }
 #[derive(Debug)]
 struct FaceRefs{
+	// I didn't write it down, but I assume the edges are directed
+	// clockwise when looking towards the face normal, i.e. right hand rule.
 	edges:Vec<SubmeshDirectedEdgeId>,
+	//verts are redundant, use edge[i].verts[0]
 	//verts:Vec<VertId>,
 }
 #[derive(Debug)]
 struct EdgeRefs{
 	faces:[SubmeshFaceId;2],//left, right
-	verts:[SubmeshVertId;2],//bottom, top
+	verts:[SubmeshVertId;2],//start, end
 }
 #[derive(Debug)]
 struct VertRefs{
 	faces:Vec<SubmeshFaceId>,
+	// edges are always directed away from the vert
 	edges:Vec<SubmeshDirectedEdgeId>,
 }
 #[derive(Debug)]
@@ -434,7 +439,7 @@ impl TryFrom<&model::Mesh> for PhysicsMesh{
 	}
 }
 
-#[derive(Debug)]
+#[derive(Debug,Clone,Copy)]
 pub struct PhysicsMeshView<'a>{
 	data:&'a PhysicsMeshData,
 	topology:&'a PhysicsMeshTopology,
@@ -453,6 +458,18 @@ impl MeshQuery for PhysicsMeshView<'_>{
 		// invariant: meshes always encompass the origin
 		vec3::zero()
 	}
+	fn farthest_vert(&self,dir:Planar64Vec3)->SubmeshVertId{
+		//this happens to be well-defined.  there are no virtual virtices
+		SubmeshVertId::new(
+			self.topology.verts.iter()
+			.enumerate()
+			.max_by_key(|&(_,&vert_id)|
+				dir.dot(self.data.verts[vert_id.get() as usize].0)
+			)
+			//assume there is more than zero vertices.
+			.unwrap().0 as u32
+		)
+	}
 	//ideally I never calculate the vertex position, but I have to for the graphical meshes...
 	fn vert(&self,vert_id:SubmeshVertId)->Planar64Vec3{
 		let vert_idx=self.topology.verts[vert_id.get() as usize].get() as usize;
@@ -491,7 +508,7 @@ impl PhysicsMeshTransform{
 	}
 }
 
-#[derive(Debug)]
+#[derive(Debug,Clone,Copy)]
 pub struct TransformedMesh<'a>{
 	view:PhysicsMeshView<'a>,
 	transform:&'a PhysicsMeshTransform,
@@ -509,18 +526,6 @@ impl TransformedMesh<'_>{
 	pub fn verts<'a>(&'a self)->impl Iterator<Item=Vector3<Fixed<2,64>>>+'a{
 		self.view.data.verts.iter().map(|&Vert(pos)|self.transform.vertex.transform_point3(pos))
 	}
-	fn farthest_vert(&self,dir:Planar64Vec3)->SubmeshVertId{
-		//this happens to be well-defined.  there are no virtual virtices
-		SubmeshVertId::new(
-			self.view.topology.verts.iter()
-			.enumerate()
-			.max_by_key(|&(_,&vert_id)|
-				dir.dot(self.transform.vertex.transform_point3(self.view.data.verts[vert_id.get() as usize].0))
-			)
-			//assume there is more than zero vertices.
-			.unwrap().0 as u32
-		)
-	}
 }
 impl MeshQuery for TransformedMesh<'_>{
 	type Face=SubmeshFaceId;
@@ -541,6 +546,18 @@ impl MeshQuery for TransformedMesh<'_>{
 	fn hint_point(&self)->Planar64Vec3{
 		self.transform.vertex.translation
 	}
+	fn farthest_vert(&self,dir:Planar64Vec3)->SubmeshVertId{
+		//this happens to be well-defined.  there are no virtual virtices
+		SubmeshVertId::new(
+			self.view.topology.verts.iter()
+			.enumerate()
+			.max_by_key(|&(_,&vert_id)|
+				dir.dot(self.transform.vertex.transform_point3(self.view.data.verts[vert_id.get() as usize].0))
+			)
+			//assume there is more than zero vertices.
+			.unwrap().0 as u32
+		)
+	}
 	#[inline]
 	fn face_edges(&self,face_id:SubmeshFaceId)->impl AsRef<[SubmeshDirectedEdgeId]>{
 		self.view.face_edges(face_id)
@@ -567,10 +584,19 @@ impl MeshQuery for TransformedMesh<'_>{
 //(face,vertex)
 //(edge,edge)
 //(vertex,face)
-#[derive(Clone,Copy,Debug)]
+#[derive(Clone,Copy,Debug,Eq,PartialEq)]
 pub enum MinkowskiVert{
 	VertVert(SubmeshVertId,SubmeshVertId),
 }
+// TODO: remove this
+impl core::ops::Neg for MinkowskiVert{
+	type Output=Self;
+	fn neg(self)->Self::Output{
+		match self{
+			MinkowskiVert::VertVert(v0,v1)=>MinkowskiVert::VertVert(v1,v0),
+		}
+	}
+}
 #[derive(Clone,Copy,Debug)]
 pub enum MinkowskiEdge{
 	VertEdge(SubmeshVertId,SubmeshEdgeId),
@@ -607,7 +633,7 @@ impl DirectedEdge for MinkowskiDirectedEdge{
 		}
 	}
 }
-#[derive(Clone,Copy,Debug,Hash,Eq,PartialEq)]
+#[derive(Clone,Copy,Debug,Hash)]
 pub enum MinkowskiFace{
 	VertFace(SubmeshVertId,SubmeshFaceId),
 	EdgeEdge(SubmeshEdgeId,SubmeshEdgeId,bool),
@@ -623,23 +649,20 @@ pub struct MinkowskiMesh<'a>{
 	mesh1:TransformedMesh<'a>,
 }
 
-//infinity fev algorithm state transition
-#[derive(Debug)]
-enum Transition{
-	Done,//found closest vert, no edges are better
-	Vert(MinkowskiVert),//transition to vert
-}
-enum EV{
-	Vert(MinkowskiVert),
-	Edge(MinkowskiEdge),
-}
-
 pub type GigaTime=Ratio<Fixed<4,128>,Fixed<4,128>>;
 pub fn into_giga_time(time:Time,relative_to:Time)->GigaTime{
 	let r=(time-relative_to).to_ratio();
 	Ratio::new(r.num.widen_4(),r.den.widen_4())
 }
 
+// TODO: remove this
+impl<'a> core::ops::Neg for &MinkowskiMesh<'a>{
+	type Output=MinkowskiMesh<'a>;
+	fn neg(self)->Self::Output{
+		MinkowskiMesh::minkowski_sum(self.mesh1,self.mesh0)
+	}
+}
+
 impl MinkowskiMesh<'_>{
 	pub fn minkowski_sum<'a>(mesh0:TransformedMesh<'a>,mesh1:TransformedMesh<'a>)->MinkowskiMesh<'a>{
 		MinkowskiMesh{
@@ -647,140 +670,32 @@ impl MinkowskiMesh<'_>{
 			mesh1,
 		}
 	}
-	fn farthest_vert(&self,dir:Planar64Vec3)->MinkowskiVert{
-		MinkowskiVert::VertVert(self.mesh0.farthest_vert(dir),self.mesh1.farthest_vert(-dir))
-	}
-	fn next_transition_vert(&self,vert_id:MinkowskiVert,best_distance_squared:&mut Fixed<2,64>,infinity_dir:Planar64Vec3,point:Planar64Vec3)->Transition{
-		let mut best_transition=Transition::Done;
-		for &directed_edge_id in self.vert_edges(vert_id).as_ref(){
-			let edge_n=self.directed_edge_n(directed_edge_id);
-			//is boundary uncrossable by a crawl from infinity
-			let edge_verts=self.edge_verts(directed_edge_id.as_undirected());
-			//select opposite vertex
-			let test_vert_id=edge_verts.as_ref()[directed_edge_id.parity() as usize];
-			//test if it's closer
-			let diff=point-self.vert(test_vert_id);
-			if edge_n.dot(infinity_dir).is_zero(){
-				let distance_squared=diff.dot(diff);
-				if distance_squared<*best_distance_squared{
-					best_transition=Transition::Vert(test_vert_id);
-					*best_distance_squared=distance_squared;
-				}
-			}
-		}
-		best_transition
-	}
-	fn final_ev(&self,vert_id:MinkowskiVert,best_distance_squared:&mut Fixed<2,64>,infinity_dir:Planar64Vec3,point:Planar64Vec3)->EV{
-		let mut best_transition=EV::Vert(vert_id);
-		let diff=point-self.vert(vert_id);
-		for &directed_edge_id in self.vert_edges(vert_id).as_ref(){
-			let edge_n=self.directed_edge_n(directed_edge_id);
-			//is boundary uncrossable by a crawl from infinity
-			//check if time of collision is outside Time::MIN..Time::MAX
-			if edge_n.dot(infinity_dir).is_zero(){
-				let d=edge_n.dot(diff);
-				//test the edge
-				let edge_nn=edge_n.dot(edge_n);
-				if !d.is_negative()&&d<=edge_nn{
-					let distance_squared={
-						let c=diff.cross(edge_n);
-						//wrap for speed
-						(c.dot(c)/edge_nn).divide().wrap_2()
-					};
-					if distance_squared<=*best_distance_squared{
-						best_transition=EV::Edge(directed_edge_id.as_undirected());
-						*best_distance_squared=distance_squared;
-					}
-				}
-			}
-		}
-		best_transition
-	}
-	fn crawl_boundaries(&self,mut vert_id:MinkowskiVert,infinity_dir:Planar64Vec3,point:Planar64Vec3)->EV{
-		let mut best_distance_squared={
-			let diff=point-self.vert(vert_id);
-			diff.dot(diff)
-		};
-		loop{
-			match self.next_transition_vert(vert_id,&mut best_distance_squared,infinity_dir,point){
-				Transition::Done=>return self.final_ev(vert_id,&mut best_distance_squared,infinity_dir,point),
-				Transition::Vert(new_vert_id)=>vert_id=new_vert_id,
-			}
-		}
-	}
-	/// This function drops a vertex down to an edge or a face if the path from infinity did not cross any vertex-edge boundaries but the point is supposed to have already crossed a boundary down from a vertex
-	fn infinity_fev(&self,infinity_dir:Planar64Vec3,point:Planar64Vec3)->FEV::<MinkowskiMesh<'_>>{
-		//start on any vertex
-		//cross uncrossable vertex-edge boundaries until you find the closest vertex or edge
-		//cross edge-face boundary if it's uncrossable
-		match self.crawl_boundaries(self.farthest_vert(infinity_dir),infinity_dir,point){
-			//if a vert is returned, it is the closest point to the infinity point
-			EV::Vert(vert_id)=>FEV::Vert(vert_id),
-			EV::Edge(edge_id)=>{
-				//cross to face if the boundary is not crossable and we are on the wrong side
-				let edge_n=self.edge_n(edge_id);
-				// point is multiplied by two because vert_sum sums two vertices.
-				let delta_pos=point*2-{
-					let &[v0,v1]=self.edge_verts(edge_id).as_ref();
-					self.vert(v0)+self.vert(v1)
-				};
-				for (i,&face_id) in self.edge_faces(edge_id).as_ref().iter().enumerate(){
-					let face_n=self.face_nd(face_id).0;
-					//edge-face boundary nd, n facing out of the face towards the edge
-					let boundary_n=face_n.cross(edge_n)*(i as i64*2-1);
-					let boundary_d=boundary_n.dot(delta_pos);
-					//check if time of collision is outside Time::MIN..Time::MAX
-					//infinity_dir can always be treated as a velocity
-					if !boundary_d.is_positive()&&boundary_n.dot(infinity_dir).is_zero(){
-						//both faces cannot pass this condition, return early if one does.
-						return FEV::Face(face_id);
-					}
-				}
-				FEV::Edge(edge_id)
-			},
-		}
-	}
-	// TODO: fundamentally improve this algorithm.
-	// All it needs to do is find the closest point on the mesh
-	// and return the FEV which the point resides on.
-	//
-	// What it actually does is use the above functions to trace a ray in from infinity,
-	// crawling the closest point along the mesh surface until the ray reaches
-	// the starting point to discover the final FEV.
-	//
-	// The actual collision prediction probably does a single test
-	// and then immediately returns with 0 FEV transitions on average,
-	// because of the strict time_limit constraint.
-	//
-	// Most of the calculation time is just calculating the starting point
-	// for the "actual" crawling algorithm below (predict_collision_{in|out}).
-	fn closest_fev_not_inside(&self,mut infinity_body:Body,start_time:Bound<&Time>)->Option<FEV<MinkowskiMesh<'_>>>{
-		infinity_body.infinity_dir().and_then(|dir|{
-			let infinity_fev=self.infinity_fev(-dir,infinity_body.position);
-			//a line is simpler to solve than a parabola
-			infinity_body.velocity=dir;
-			infinity_body.acceleration=vec3::zero();
-			//crawl in from negative infinity along a tangent line to get the closest fev
-			infinity_fev.crawl(self,&infinity_body,Bound::Unbounded,start_time).miss()
-		})
-	}
 	pub fn predict_collision_in(&self,relative_body:&Body,range:impl RangeBounds<Time>)->Option<(MinkowskiFace,GigaTime)>{
-		self.closest_fev_not_inside(*relative_body,range.start_bound()).and_then(|fev|{
-			//continue forwards along the body parabola
-			fev.crawl(self,relative_body,range.start_bound(),range.end_bound()).hit()
-		})
+		let start_position=match range.start_bound(){
+			Bound::Included(time)=>relative_body.extrapolated_position(*time),
+			Bound::Excluded(time)=>relative_body.extrapolated_position(*time),
+			Bound::Unbounded=>relative_body.position,
+		};
+		let fev=crate::minimum_difference::closest_fev_not_inside(self,start_position)?;
+		//continue forwards along the body parabola
+		fev.crawl(self,relative_body,range.start_bound(),range.end_bound()).hit()
 	}
 	pub fn predict_collision_out(&self,relative_body:&Body,range:impl RangeBounds<Time>)->Option<(MinkowskiFace,GigaTime)>{
 		let (lower_bound,upper_bound)=(range.start_bound(),range.end_bound());
+		// TODO: handle unbounded collision using infinity fev
+		let start_position=match upper_bound{
+			Bound::Included(time)=>relative_body.extrapolated_position(*time),
+			Bound::Excluded(time)=>relative_body.extrapolated_position(*time),
+			Bound::Unbounded=>relative_body.position,
+		};
+		let fev=crate::minimum_difference::closest_fev_not_inside(self,start_position)?;
 		// swap and negate bounds to do a time inversion
 		let (lower_bound,upper_bound)=(upper_bound.map(|&t|-t),lower_bound.map(|&t|-t));
 		let infinity_body=-relative_body;
-		self.closest_fev_not_inside(infinity_body,lower_bound.as_ref()).and_then(|fev|{
-			//continue backwards along the body parabola
-			fev.crawl(self,&infinity_body,lower_bound.as_ref(),upper_bound.as_ref()).hit()
-				//no need to test -time<time_limit because of the first step
-				.map(|(face,time)|(face,-time))
-		})
+		//continue backwards along the body parabola
+		fev.crawl(self,&infinity_body,lower_bound.as_ref(),upper_bound.as_ref()).hit()
+			//no need to test -time<time_limit because of the first step
+			.map(|(face,time)|(face,-time))
 	}
 	pub fn predict_collision_face_out(&self,relative_body:&Body,range:impl RangeBounds<Time>,contact_face_id:MinkowskiFace)->Option<(MinkowskiDirectedEdge,GigaTime)>{
 		// TODO: make better
@@ -810,20 +725,8 @@ impl MinkowskiMesh<'_>{
 		}
 		best_edge
 	}
-	fn infinity_in(&self,infinity_body:Body)->Option<(MinkowskiFace,GigaTime)>{
-		let infinity_fev=self.infinity_fev(-infinity_body.velocity,infinity_body.position);
-		// Bound::Included means that the surface of the mesh is included in the mesh
-		infinity_fev.crawl(self,&infinity_body,Bound::Unbounded,Bound::Included(&infinity_body.time)).hit()
-	}
-	pub fn is_point_in_mesh(&self,point:Planar64Vec3)->bool{
-		let infinity_body=Body::new(point,vec3::Y,vec3::zero(),Time::ZERO);
-		//movement must escape the mesh forwards and backwards in time,
-		//otherwise the point is not inside the mesh
-		self.infinity_in(infinity_body)
-    	.is_some_and(|_|
-			self.infinity_in(-infinity_body)
-    		.is_some()
-     	)
+	pub fn contains_point(&self,point:Planar64Vec3)->bool{
+		crate::minimum_difference::contains_point(self,point)
 	}
 }
 impl MeshQuery for MinkowskiMesh<'_>{
@@ -863,8 +766,10 @@ impl MeshQuery for MinkowskiMesh<'_>{
 		}
 	}
 	fn hint_point(&self)->Planar64Vec3{
-		self.mesh1.transform.vertex.translation-
-		self.mesh0.transform.vertex.translation
+		self.mesh0.transform.vertex.translation-self.mesh1.transform.vertex.translation
+	}
+	fn farthest_vert(&self,dir:Planar64Vec3)->MinkowskiVert{
+		MinkowskiVert::VertVert(self.mesh0.farthest_vert(dir),self.mesh1.farthest_vert(-dir))
 	}
 	fn face_edges(&self,face_id:MinkowskiFace)->impl AsRef<[MinkowskiDirectedEdge]>{
 		match face_id{

engine/physics/src/physics.rs

@@ -28,6 +28,7 @@ pub enum InternalInstruction{
 	CollisionStart(Collision,model_physics::GigaTime),
 	CollisionEnd(Collision,model_physics::GigaTime),
 	StrafeTick,
+	// TODO: add GigaTime to ReachWalkTargetVelocity
 	ReachWalkTargetVelocity,
 	// Water,
 }
@@ -261,6 +262,15 @@ pub struct PhysicsCamera{
 impl PhysicsCamera{
 	const ANGLE_PITCH_LOWER_LIMIT:Angle32=Angle32::NEG_FRAC_PI_2;
 	const ANGLE_PITCH_UPPER_LIMIT:Angle32=Angle32::FRAC_PI_2;
+	pub fn new(
+		sensitivity:Ratio64Vec2,
+		clamped_mouse_pos:glam::IVec2,
+	)->Self{
+		Self{
+			sensitivity,
+			clamped_mouse_pos,
+		}
+	}
 	pub fn move_mouse(&mut self,mouse_delta:glam::IVec2){
 		let mut unclamped_mouse_pos=self.clamped_mouse_pos+mouse_delta;
 		unclamped_mouse_pos.y=unclamped_mouse_pos.y.clamp(
@@ -729,7 +739,7 @@ struct IntersectModel{
 	transform:PhysicsMeshTransform,
 }
 
-#[derive(Debug,Clone,Copy,Eq,Hash,PartialEq)]
+#[derive(Debug,Clone,Copy,Hash)]
 pub struct ContactCollision{
 	convex_mesh_id:ConvexMeshId<ContactModelId>,
 	face_id:model_physics::MinkowskiFace,
@@ -738,7 +748,7 @@ pub struct ContactCollision{
 pub struct IntersectCollision{
 	convex_mesh_id:ConvexMeshId<IntersectModelId>,
 }
-#[derive(Debug,Clone,Eq,Hash,PartialEq)]
+#[derive(Debug,Clone,Hash)]
 pub enum Collision{
 	Contact(ContactCollision),
 	Intersect(IntersectCollision),
@@ -873,7 +883,7 @@ pub struct PhysicsState{
 	//input_state
 	input_state:InputState,
 	//style
-	style:StyleModifiers,//mode style with custom style updates applied
+	pub style:StyleModifiers,//mode style with custom style updates applied
 	//gameplay_state
 	mode_state:ModeState,
 	move_state:MoveState,
@@ -1277,7 +1287,7 @@ fn recalculate_touching(
 		//no checks are needed because of the time limits.
 		let model_mesh=models.mesh(convex_mesh_id);
 		let minkowski=model_physics::MinkowskiMesh::minkowski_sum(model_mesh,hitbox_mesh.transformed_mesh());
-		if minkowski.is_point_in_mesh(body.position){
+		if minkowski.contains_point(body.position){
 			match convex_mesh_id.model_id{
 				//being inside of contact objects is an invalid physics state
 				//but the physics isn't advanced enough to do anything about it yet
@@ -1669,7 +1679,20 @@ fn collision_start_intersect(
 			},
 			Some(gameplay_modes::Zone::Finish)=>{
 				match run.finish(time){
-					Ok(())=>println!("@@@@ Finished run time={}",run.time(time)),
+					Ok(())=>{
+						let time=run.time(time);
+						let h=time.get()/(Time::ONE_SECOND.get()*60*60);
+						let m=(time.get()/(Time::ONE_SECOND.get()*60)).rem_euclid(60);
+						let s=(time.get()/(Time::ONE_SECOND.get())).rem_euclid(60);
+						let ms=(time.get()/(Time::ONE_MILLISECOND.get())).rem_euclid(1000);
+						let us=(time.get()/(Time::ONE_MICROSECOND.get())).rem_euclid(1000);
+						let ns=(time.get()/(Time::ONE_NANOSECOND.get())).rem_euclid(1000);
+						if h==0{
+							println!("@@@@ Finished run time={m:02}:{s:02}.{ms:03}_{us:03}_{ns:03}");
+						}else{
+							println!("@@@@ Finished run time={h}:{m:02}:{s:02}.{ms:03}_{us:03}_{ns:03}");
+						}
+					},
 					Err(e)=>println!("@@@@ Run Finish error:{e:?}"),
 				}
 			},
@@ -1743,17 +1766,14 @@ fn collision_end_intersect(
 }
 fn atomic_internal_instruction(state:&mut PhysicsState,data:&PhysicsData,ins:TimedInstruction<InternalInstruction,Time>){
 	state.time=ins.time;
-	let (should_advance_body,goober_time)=match ins.instruction{
+	match ins.instruction{
+		// collisions advance the body precisely
 		InternalInstruction::CollisionStart(_,dt)
-		|InternalInstruction::CollisionEnd(_,dt)=>(true,Some(dt)),
-		InternalInstruction::StrafeTick
-		|InternalInstruction::ReachWalkTargetVelocity=>(true,None),
-	};
-	if should_advance_body{
-		match goober_time{
-			Some(dt)=>state.body.advance_time_ratio_dt(dt),
-			None=>state.body.advance_time(state.time),
-		}
+		|InternalInstruction::CollisionEnd(_,dt)=>state.body.advance_time_ratio_dt(dt),
+		// this advances imprecisely
+		InternalInstruction::ReachWalkTargetVelocity=>state.body.advance_time(state.time),
+		// strafe tick decides for itself whether to advance the body.
+		InternalInstruction::StrafeTick=>(),
 	}
 		match ins.instruction{
 			InternalInstruction::CollisionStart(collision,_)=>{
@@ -1800,6 +1820,8 @@ fn atomic_internal_instruction(state:&mut PhysicsState,data:&PhysicsData,ins:Tim
 						let masked_controls=strafe_settings.mask(controls);
 						let control_dir=state.style.get_control_dir(masked_controls);
 						if control_dir!=vec3::zero(){
+							// manually advance time
+							state.body.advance_time(state.time);
 							let camera_mat=state.camera.simulate_move_rotation_y(state.input_state.lerp_delta(state.time).x);
 							if let Some(ticked_velocity)=strafe_settings.tick_velocity(state.body.velocity,(camera_mat*control_dir).with_length(Planar64::ONE).divide().wrap_1()){
 								//this is wrong but will work ig
@@ -1972,7 +1994,7 @@ mod test{
 		let hitbox_mesh=h1.transformed_mesh();
 		let platform_mesh=h0.transformed_mesh();
 		let minkowski=model_physics::MinkowskiMesh::minkowski_sum(platform_mesh,hitbox_mesh);
-		let collision=minkowski.predict_collision_in(&relative_body,Time::ZERO..Time::from_secs(10));
+		let collision=minkowski.predict_collision_in(&relative_body,..);
 		assert_eq!(collision.map(|tup|relative_body.time+tup.1.into()),expected_collision_time,"Incorrect time of collision");
 	}
 	fn test_collision_rotated(relative_body:Body,expected_collision_time:Option<Time>){
@@ -1990,7 +2012,7 @@ mod test{
 		let hitbox_mesh=h1.transformed_mesh();
 		let platform_mesh=h0.transformed_mesh();
 		let minkowski=model_physics::MinkowskiMesh::minkowski_sum(platform_mesh,hitbox_mesh);
-		let collision=minkowski.predict_collision_in(&relative_body,Time::ZERO..Time::from_secs(10));
+		let collision=minkowski.predict_collision_in(&relative_body,..);
 		assert_eq!(collision.map(|tup|relative_body.time+tup.1.into()),expected_collision_time,"Incorrect time of collision");
 	}
 	fn test_collision(relative_body:Body,expected_collision_time:Option<Time>){

engine/session/src/session.rs

@@ -52,7 +52,6 @@ pub enum SessionControlInstruction{
 pub enum SessionPlaybackInstruction{
 	SkipForward,
 	SkipBack,
-	TogglePaused,
 	DecreaseTimescale,
 	IncreaseTimescale,
 }
@@ -150,7 +149,7 @@ enum ViewState{
 }
 
 pub struct Session{
-	directories:Directories,
+	directories:Option<Directories>,
 	user_settings:UserSettings,
 	mouse_interpolator:MouseInterpolator,
 	view_state:ViewState,
@@ -165,7 +164,7 @@ pub struct Session{
 impl Session{
 	pub fn new(
 		user_settings:UserSettings,
-		directories:Directories,
+		directories:Option<Directories>,
 		simulation:Simulation,
 	)->Self{
 		Self{
@@ -253,7 +252,14 @@ impl InstructionConsumer<Instruction<'_>> for Session{
 				// don't flush the buffered instructions in the mouse interpolator
 				// until the mouse is confirmed to be not moving at a later time
 				// what if they pause for 5ms lmao
-				_=self.simulation.timer.set_paused(ins.time,paused);
+				match &self.view_state{
+					ViewState::Play=>{
+						_=self.simulation.timer.set_paused(ins.time,paused);
+					},
+					ViewState::Replay(bot_id)=>if let Some(replay)=self.replays.get_mut(bot_id){
+						_=replay.simulation.timer.set_paused(ins.time,paused);
+					},
+				}
 			},
 			Instruction::Control(SessionControlInstruction::CopyRecordingIntoReplayAndSpectate)=> if let ViewState::Play=self.view_state{
 				// Bind: B
@@ -299,19 +305,21 @@ impl InstructionConsumer<Instruction<'_>> for Session{
 				match view_state{
 					ViewState::Play=>(),
 					ViewState::Replay(bot_id)=>if let Some(replay)=self.replays.remove(&bot_id){
-						let mut replays_path=self.directories.replays.clone();
-						let file_name=format!("{}.snfb",ins.time);
-						std::thread::spawn(move ||{
-							std::fs::create_dir_all(replays_path.as_path()).unwrap();
-							replays_path.push(file_name);
-							let file=std::fs::File::create(replays_path).unwrap();
-							strafesnet_snf::bot::write_bot(
-								std::io::BufWriter::new(file),
-								strafesnet_physics::VERSION.get(),
-								replay.recording.instructions
-							).unwrap();
-							println!("Finished writing bot file!");
-						});
+						if let Some(directories)=&self.directories{
+							let mut replays_path=directories.replays.clone();
+							let file_name=format!("{}.snfb",ins.time);
+							std::thread::spawn(move ||{
+								std::fs::create_dir_all(replays_path.as_path()).unwrap();
+								replays_path.push(file_name);
+								let file=std::fs::File::create(replays_path).unwrap();
+								strafesnet_snf::bot::write_bot(
+									std::io::BufWriter::new(file),
+									strafesnet_physics::VERSION.get(),
+									replay.recording.instructions
+								).unwrap();
+								println!("Finished writing bot file!");
+							});
+						}
 					},
 				}
 				_=self.simulation.timer.set_paused(ins.time,false);
@@ -374,14 +382,6 @@ impl InstructionConsumer<Instruction<'_>> for Session{
 					},
 				}
 			},
-			Instruction::Playback(SessionPlaybackInstruction::TogglePaused)=>{
-				match &self.view_state{
-					ViewState::Play=>(),
-					ViewState::Replay(bot_id)=>if let Some(replay)=self.replays.get_mut(bot_id){
-						_=replay.simulation.timer.set_paused(ins.time,!replay.simulation.timer.is_paused());
-					},
-				}
-			}
 			Instruction::ChangeMap(complete_map)=>{
 				self.clear_recording();
 				self.change_map(complete_map);

integration-testing/src/tests.rs

@@ -60,8 +60,12 @@ fn physics_bug_3()->Result<(),ReplayError>{
 		// vec3::raw_xyz(0,-96915585363,1265),
 		// vec3::raw_xyz(0,-429496729600,0),
 		// corner setup before wall hits
-		vec3::raw_xyz(-1392580080675,3325402529458,-2444727738679),
-		vec3::raw_xyz(-30259028820,-22950929553,-71141663007),
+		// vec3::raw_xyz(-1392580080675,3325402529458,-2444727738679),
+		// vec3::raw_xyz(-30259028820,-22950929553,-71141663007),
+		// vec3::raw_xyz(0,-429496729600,0),
+		// Actual bug 3 repro
+		vec3::raw_xyz(-2505538624455,3357963283914,557275711118),
+		vec3::raw_xyz(204188283920,-282280474198,166172785440),
 		vec3::raw_xyz(0,-429496729600,0),
 		Time::ZERO,
 	);

lib/fixed_wide/src/fixed.rs

@@ -366,7 +366,7 @@ impl_additive_operator!( Fixed, BitXor, bitxor, Self );
 // non-wide operators.  The result is the same width as the inputs.
 
 // This macro is not used in the default configuration.
-#[allow(unused_macros)]
+#[expect(unused_macros)]
 macro_rules! impl_multiplicative_operator_not_const_generic {
 	( ($struct: ident, $trait: ident, $method: ident, $output: ty ), $width:expr ) => {
 		impl<const F:usize> core::ops::$trait for $struct<$width,F>{
@@ -545,7 +545,7 @@ impl_shift_operator!( Fixed, Shr, shr, Self );
 
 // wide operators.  The result width is the sum of the input widths, i.e. none of the multiplication
 
-#[allow(unused_macros)]
+#[expect(unused_macros)]
 macro_rules! impl_wide_operators{
 	($lhs:expr,$rhs:expr)=>{
 		impl core::ops::Mul<Fixed<$rhs,{$rhs*32}>> for Fixed<$lhs,{$lhs*32}>{

lib/rbx_loader/Cargo.toml

@@ -12,17 +12,17 @@ authors = ["Rhys Lloyd <krakow20@gmail.com>"]
 [dependencies]
 bytemuck = "1.14.3"
 glam = "0.30.0"
-regex = { version = "1.11.3", default-features = false }
-rbx_binary = { version = "1.0.1-sn5", registry = "strafesnet" }
-rbx_dom_weak =  { version = "3.0.1-sn5", registry = "strafesnet" }
+regex = { version = "1.11.3", default-features = false, features = ["unicode-perl"] }
 rbx_mesh = "0.5.0"
-rbx_reflection = "5.0.0"
-rbx_reflection_database = "1.0.0"
-rbx_xml = { version = "1.0.1-sn5", registry = "strafesnet" }
 rbxassetid = { version = "0.1.0", path = "../rbxassetid", registry = "strafesnet" }
 roblox_emulator = { version = "0.5.1", path = "../roblox_emulator", default-features = false, registry = "strafesnet" }
 strafesnet_common = { version = "0.7.0", path = "../common", registry = "strafesnet" }
 strafesnet_deferred_loader = { version = "0.5.1", path = "../deferred_loader", registry = "strafesnet" }
+rbx_binary = "2.0.1"
+rbx_dom_weak = "4.1.0"
+rbx_reflection = "6.1.0"
+rbx_reflection_database = "2.0.2"
+rbx_xml = "2.0.1"
 
 [lints]
 workspace = true

lib/rbx_loader/src/rbx.rs

@@ -559,7 +559,7 @@ pub fn convert<'a>(
 	//just going to leave it like this for now instead of reworking the data structures for this whole thing
 	let textureless_render_group=render_config_deferred_loader.acquire_render_config_id(None);
 
-	let db=rbx_reflection_database::get();
+	let db=rbx_reflection_database::get().unwrap();
 	let basepart=&db.classes["BasePart"];
 	let baseparts=dom.descendants().filter(|&instance|
 		db.classes.get(instance.class.as_str()).is_some_and(|class|

lib/roblox_emulator/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "roblox_emulator"
-version = "0.5.1"
+version = "0.5.2"
 edition = "2024"
 repository = "https://git.itzana.me/StrafesNET/strafe-project"
 license = "MIT OR Apache-2.0"
@@ -15,10 +15,10 @@ run-service=[]
 glam = "0.30.0"
 mlua = { version = "0.11.3", features = ["luau"] }
 phf = { version = "0.13.1", features = ["macros"] }
-rbx_dom_weak = { version = "3.0.1-sn5", registry = "strafesnet" }
-rbx_reflection = "5.0.0"
-rbx_reflection_database = "1.0.0"
-rbx_types = "2.0.0"
+rbx_dom_weak = "4.1.0"
+rbx_reflection = "6.1.0"
+rbx_reflection_database = "2.0.2"
+rbx_types = "3.1.0"
 
 [lints]
 workspace = true

lib/roblox_emulator/src/context.rs

@@ -52,7 +52,7 @@ impl Context{
 	}
 	/// Creates an iterator over all items of a particular class.
 	pub fn superclass_iter<'a>(&'a self,superclass:&'a str)->impl Iterator<Item=Ref>+'a{
-		let db=rbx_reflection_database::get();
+		let db=rbx_reflection_database::get().unwrap();
 		let Some(superclass)=db.classes.get(superclass)else{
 			panic!("Invalid class");
 		};

lib/roblox_emulator/src/runner/enum.rs

@@ -37,7 +37,7 @@ impl PartialEq for EnumItem<'_>{
 pub struct Enums;
 impl Enums{
 	pub fn get(&self,index:&str)->Option<EnumItems<'static>>{
-		let db=rbx_reflection_database::get();
+		let db=rbx_reflection_database::get().unwrap();
 		db.enums.get(index).map(|ed|EnumItems{ed})
 	}
 }

lib/roblox_emulator/src/runner/instance/instance.rs

@@ -37,7 +37,7 @@ pub fn dom_mut<T>(lua:&mlua::Lua,mut f:impl FnMut(&mut WeakDom)->mlua::Result<T>
 }
 
 pub fn class_is_a(class:&str,superclass:&str)->bool{
-	let db=rbx_reflection_database::get();
+	let db=rbx_reflection_database::get().unwrap();
 	let (Some(class),Some(superclass))=(db.classes.get(class),db.classes.get(superclass))else{
 		return false;
 	};
@@ -80,14 +80,14 @@ pub fn find_first_descendant_of_class<'a>(dom:&'a WeakDom,instance:&rbx_dom_weak
 }
 
 pub fn find_first_child_which_is_a<'a>(dom:&'a WeakDom,instance:&rbx_dom_weak::Instance,superclass:&str)->Option<&'a rbx_dom_weak::Instance>{
-	let db=rbx_reflection_database::get();
+	let db=rbx_reflection_database::get().unwrap();
 	let superclass_descriptor=db.classes.get(superclass)?;
 	instance.children().iter().filter_map(|&r|dom.get_by_ref(r)).find(|inst|{
 		db.classes.get(inst.class.as_str()).is_some_and(|descriptor|db.has_superclass(descriptor,superclass_descriptor))
 	})
 }
 pub fn find_first_descendant_which_is_a<'a>(dom:&'a WeakDom,instance:&rbx_dom_weak::Instance,superclass:&str)->Option<&'a rbx_dom_weak::Instance>{
-	let db=rbx_reflection_database::get();
+	let db=rbx_reflection_database::get().unwrap();
 	let superclass_descriptor=db.classes.get(superclass)?;
 	dom.descendants_of(instance.referent()).find(|inst|{
 		db.classes.get(inst.class.as_str()).is_some_and(|descriptor|db.has_superclass(descriptor,superclass_descriptor))
@@ -282,7 +282,7 @@ impl mlua::UserData for Instance{
 			dom_mut(lua,|dom|{
 				let instance=this.get(dom)?;
 				//println!("__index t={} i={index:?}",instance.name);
-				let db=rbx_reflection_database::get();
+				let db=rbx_reflection_database::get().unwrap();
 				let class=db.classes.get(instance.class.as_str()).ok_or_else(||mlua::Error::runtime("Class missing"))?;
 				// Find existing property
 				// Interestingly, ustr can know ahead of time if
@@ -344,7 +344,7 @@ impl mlua::UserData for Instance{
 			let index_str=&*index.to_str()?;
 			dom_mut(lua,|dom|{
 				let instance=this.get_mut(dom)?;
-				let db=rbx_reflection_database::get();
+				let db=rbx_reflection_database::get().unwrap();
 				let class=db.classes.get(instance.class.as_str()).ok_or_else(||mlua::Error::runtime("Class missing"))?;
 				let property=db.superclasses_iter(class).find_map(|cls|
 					cls.properties.get(index_str)

map-tool/Cargo.toml

@@ -13,10 +13,10 @@ futures = "0.3.31"
 image = "0.25.2"
 image_dds = "0.7.1"
 rbx_asset = { version = "0.5.0", registry = "strafesnet" }
-rbx_binary  = { version = "1.0.1-sn5", registry = "strafesnet" }
-rbx_dom_weak =  { version = "3.0.1-sn5", registry = "strafesnet" }
-rbx_reflection_database = "1.0.0"
-rbx_xml = { version = "1.0.1-sn5", registry = "strafesnet" }
+rbx_binary = "2.0.1"
+rbx_dom_weak = "4.1.0"
+rbx_reflection_database = "2.0.2"
+rbx_xml = "2.0.1"
 rbxassetid = { version = "0.1.0", registry = "strafesnet" }
 strafesnet_bsp_loader = { version = "0.3.1", path = "../lib/bsp_loader", registry = "strafesnet" }
 strafesnet_deferred_loader = { version = "0.5.1", path = "../lib/deferred_loader", registry = "strafesnet" }

strafe-client/Cargo.toml

@@ -16,6 +16,7 @@ source = ["dep:strafesnet_deferred_loader", "dep:strafesnet_bsp_loader"]
 roblox = ["dep:strafesnet_deferred_loader", "dep:strafesnet_rbx_loader"]
 
 [dependencies]
+chrono = "0.4.39"
 glam = "0.30.0"
 parking_lot = "0.12.1"
 pollster = "0.4.0"
@@ -25,10 +26,14 @@ strafesnet_deferred_loader = { path = "../lib/deferred_loader", registry = "stra
 strafesnet_graphics = { path = "../engine/graphics", registry = "strafesnet" }
 strafesnet_physics = { path = "../engine/physics", registry = "strafesnet" }
 strafesnet_rbx_loader = { path = "../lib/rbx_loader", registry = "strafesnet", optional = true }
+strafesnet_roblox_bot_file = { version = "0.8.1", registry = "strafesnet" }
 strafesnet_session = { path = "../engine/session", registry = "strafesnet" }
 strafesnet_settings = { path = "../engine/settings", registry = "strafesnet" }
 strafesnet_snf = { path = "../lib/snf", registry = "strafesnet", optional = true }
-wgpu = "27.0.0"
+wasm-bindgen = "0.2.99"
+wasm-bindgen-futures = "0.4.49"
+web-sys = { version = "0.3.76", features = ["console"] }
+wgpu = "28.0.0"
 winit = "0.30.7"
 
 [profile.dev]

strafe-client/models/teslacyberv3.0.mtl

@@ -1,62 +0,0 @@
-# Blender MTL File: 'teslacyberv3.0.blend'
-# Material Count: 6
-
-newmtl Material
-Ns 65.476285
-Ka 1.000000 1.000000 1.000000
-Kd 0.411568 0.411568 0.411568
-Ks 0.614679 0.614679 0.614679
-Ke 0.000000 0.000000 0.000000
-Ni 36.750000
-d 1.000000
-illum 3
-
-newmtl Материал
-Ns 323.999994
-Ka 1.000000 1.000000 1.000000
-Kd 0.800000 0.800000 0.800000
-Ks 0.500000 0.500000 0.500000
-Ke 0.000000 0.000000 0.000000
-Ni 1.000000
-d 1.000000
-illum 2
-
-newmtl Материал.001
-Ns 900.000000
-Ka 1.000000 1.000000 1.000000
-Kd 0.026240 0.026240 0.026240
-Ks 0.000000 0.000000 0.000000
-Ke 0.000000 0.000000 0.000000
-Ni 1.450000
-d 1.000000
-illum 1
-
-newmtl Материал.002
-Ns 0.000000
-Ka 1.000000 1.000000 1.000000
-Kd 0.031837 0.032429 0.029425
-Ks 0.169725 0.169725 0.169725
-Ke 0.000000 0.000000 0.000000
-Ni 0.000000
-d 1.000000
-illum 2
-
-newmtl Материал.003
-Ns 900.000000
-Ka 1.000000 1.000000 1.000000
-Kd 0.023585 0.083235 0.095923
-Ks 1.000000 1.000000 1.000000
-Ke 0.000000 0.000000 0.000000
-Ni 45.049999
-d 1.000000
-illum 3
-
-newmtl Материал.004
-Ns 323.999994
-Ka 1.000000 1.000000 1.000000
-Kd 0.800000 0.800000 0.800000
-Ks 0.500000 0.500000 0.500000
-Ke 0.000000 0.000000 0.000000
-Ni 1.000000
-d 1.000000
-illum 2

strafe-client/src/app.rs

@@ -4,12 +4,12 @@ use strafesnet_common::instruction::TimedInstruction;
 use strafesnet_common::session::Time as SessionTime;
 
 pub struct App<'a>{
-	root_time:std::time::Instant,
+	root_time:chrono::DateTime<chrono::Utc>,
 	window_thread:crate::compat_worker::QNWorker<'a,TimedInstruction<Instruction,SessionTime>>,
 }
 impl<'a> App<'a>{
 	pub fn new(
-		root_time:std::time::Instant,
+		root_time:chrono::DateTime<chrono::Utc>,
 		window_thread:crate::compat_worker::QNWorker<'a,TimedInstruction<Instruction,SessionTime>>,
 	)->App<'a>{
 		Self{
@@ -18,7 +18,7 @@ impl<'a> App<'a>{
 		}
 	}
 	fn send_timed_instruction(&mut self,instruction:Instruction){
-		let time=integer::Time::from_nanos(self.root_time.elapsed().as_nanos() as i64);
+		let time=integer::Time::from_nanos((chrono::Utc::now()-self.root_time).num_nanoseconds().unwrap());
 		self.window_thread.send(TimedInstruction{time,instruction}).unwrap();
 	}
 }

strafe-client/src/compat_worker.rs

@@ -2,11 +2,11 @@ pub type QNWorker<'a,Task>=CompatNWorker<'a,Task>;
 pub type INWorker<'a,Task>=CompatNWorker<'a,Task>;
 
 pub struct CompatNWorker<'a,Task>{
-	f:Box<dyn FnMut(Task)+Send+'a>,
+	f:Box<dyn FnMut(Task)+'a>,
 }
 
 impl<'a,Task> CompatNWorker<'a,Task>{
-	pub fn new(f:impl FnMut(Task)+Send+'a)->CompatNWorker<'a,Task>{
+	pub fn new(f:impl FnMut(Task)+'a)->CompatNWorker<'a,Task>{
 		Self{
 			f:Box::new(f),
 		}

strafe-client/src/file.rs

@@ -87,10 +87,13 @@ pub enum LoadFormat{
 	Bot(strafesnet_snf::bot::Segment),
 }
 
-pub fn load<P:AsRef<std::path::Path>>(path:P)->Result<LoadFormat,LoadError>{
+pub fn load_file<P:AsRef<std::path::Path>>(path:P)->Result<LoadFormat,LoadError>{
 	//blocking because it's simpler...
 	let file=std::fs::File::open(path).map_err(LoadError::File)?;
-	match read(file).map_err(LoadError::ReadError)?{
+	load(file)
+}
+pub fn load<R:Read+std::io::Seek>(reader:R)->Result<LoadFormat,LoadError>{
+	match read(reader).map_err(LoadError::ReadError)?{
 		#[cfg(feature="snf")]
 		ReadFormat::SNFB(bot)=>Ok(LoadFormat::Bot(bot)),
 		#[cfg(feature="snf")]

strafe-client/src/graphics_worker.rs

@@ -33,12 +33,12 @@ pub fn new(
 			},
 			Instruction::Resize(size,user_settings)=>{
 				println!("Resizing to {:?}",size);
-				let t0=std::time::Instant::now();
+				//let t0=std::time::Instant::now();
 				config.width=size.width.max(1);
 				config.height=size.height.max(1);
 				surface.configure(&device,&config);
 				graphics.resize(&device,&config,&user_settings);
-				println!("Resize took {:?}",t0.elapsed());
+				//println!("Resize took {:?}",t0.elapsed());
 			}
 			Instruction::Render(frame_state)=>{
 				//this has to go deeper somehow

strafe-client/src/main.rs

@@ -9,5 +9,8 @@ mod graphics_worker;
 const TITLE:&'static str=concat!("Strafe Client v",env!("CARGO_PKG_VERSION"));
 
 fn main(){
-	setup::setup_and_start(TITLE);
+	#[cfg(target_arch="wasm32")]
+	wasm_bindgen_futures::spawn_local(setup::setup_and_start(TITLE));
+	#[cfg(not(target_arch="wasm32"))]
+	pollster::block_on(setup::setup_and_start(TITLE));
 }

strafe-client/src/physics_worker.rs

@@ -1,13 +1,15 @@
 use crate::graphics_worker::Instruction as GraphicsInstruction;
 use strafesnet_settings::{directories::Directories,settings};
 use strafesnet_session::session::{
+	FrameState,
 	Session,Simulation,SessionInputInstruction,SessionControlInstruction,SessionPlaybackInstruction,ImplicitModeInstruction,
 	Instruction as SessionInstruction,
 };
-use strafesnet_common::instruction::{TimedInstruction,InstructionConsumer};
-use strafesnet_common::physics::Time as PhysicsTime;
-use strafesnet_common::session::Time as SessionTime;
-use strafesnet_common::timer::Timer;
+use strafesnet_common::instruction::TimedInstruction;
+use strafesnet_common::physics::{Time as PhysicsTime,TimeInner as PhysicsTimeInner};
+use strafesnet_common::session::{Time as SessionTime,TimeInner as SessionTimeInner};
+use strafesnet_common::timer::{Scaled,Timer,TimerState};
+use strafesnet_physics::physics::PhysicsData;
 
 pub enum Instruction{
 	SessionInput(SessionInputInstruction),
@@ -19,12 +21,136 @@ pub enum Instruction{
 	LoadReplay(strafesnet_snf::bot::Segment),
 }
 
+fn vector3_to_glam(v:&strafesnet_roblox_bot_file::v0::Vector3)->glam::Vec3{
+	glam::vec3(v.x,v.y,v.z)
+}
+fn f32_to_p64(f:f32)->strafesnet_common::integer::Planar64{
+	f.try_into().unwrap_or(strafesnet_common::integer::Planar64::ZERO)
+}
+
+struct PlayBacker{
+	//Instructions
+	timelines:strafesnet_roblox_bot_file::v0::Block,
+	//"Simulation"
+	event_id:usize,
+	offset:f64,
+	duration:f64,
+	timer:Timer<Scaled<SessionTimeInner,PhysicsTimeInner>>,
+	physics_data:PhysicsData,
+	camera_offset:strafesnet_common::integer::Planar64Vec3,
+}
+impl PlayBacker{
+	pub fn new(
+		physics_data:PhysicsData,
+		timelines:strafesnet_roblox_bot_file::v0::Block,
+		camera_offset:strafesnet_common::integer::Planar64Vec3,
+	)->Self{
+		let first=timelines.output_events.first().unwrap();
+		let last=timelines.output_events.last().unwrap();
+		Self{
+			offset:first.time,
+			duration:last.time-first.time,
+			timelines,
+			event_id:0,
+			timer:Timer::from_state(Scaled::identity(),false),
+			physics_data,
+			camera_offset,
+		}
+	}
+	pub fn handle_instruction(&mut self,TimedInstruction{time,instruction}:&TimedInstruction<SessionInstruction,SessionTime>){
+		//match the instruction so the playback is pausable :D
+		match instruction{
+			&SessionInstruction::Control(SessionControlInstruction::SetPaused(paused))=>{
+				let _=self.timer.set_paused(*time,paused);
+			},
+			_=>(),
+		}
+		let simulation_time=self.timer.time(*time);
+		let mut time_float=simulation_time.get() as f64/PhysicsTime::ONE_SECOND.get() as f64+self.offset;
+		loop{
+			match self.timelines.output_events.get(self.event_id+1){
+				Some(next_event)=>{
+					if next_event.time<time_float{
+						self.event_id+=1;
+					}else{
+						break;
+					}
+				},
+				None=>{
+					//reset playback
+					self.event_id=0;
+					self.offset-=self.duration;
+					time_float-=self.duration;
+				},
+			}
+		}
+	}
+	pub fn get_frame_state(&self,time:SessionTime)->FrameState{
+		use strafesnet_physics::physics::{Body,PhysicsCamera};
+
+		let time=self.timer.time(time);
+		let event0=&self.timelines.output_events[self.event_id];
+		let event1=&self.timelines.output_events[self.event_id+1];
+		let p0=vector3_to_glam(&event0.event.position);
+		let p1=vector3_to_glam(&event1.event.position);
+		let v0=vector3_to_glam(&event0.event.velocity);
+		let v1=vector3_to_glam(&event1.event.velocity);
+		let a0=vector3_to_glam(&event0.event.acceleration);
+		let a1=vector3_to_glam(&event1.event.acceleration);
+		let t0=event0.time;
+		let t1=event1.time;
+		let time_float=time.get() as f64/PhysicsTime::ONE_SECOND.get() as f64;
+		let t=((time_float+self.offset-t0)/(t1-t0)) as f32;
+		let p=p0.lerp(p1,t).to_array().map(f32_to_p64);
+		let v=v0.lerp(v1,t).to_array().map(f32_to_p64);
+		let a=a0.lerp(a1,t).to_array().map(f32_to_p64);
+
+		//println!("position={:?}",p);
+
+		let angles0=vector3_to_glam(&event0.event.angles);
+		let angles1=vector3_to_glam(&event1.event.angles);
+		let angles=angles0.lerp(angles1,t);
+		// mask mantissa out and set it to minimum value
+		// let ax_epsilon=f32::from_bits(angles.x.to_bits()&!((1<<23)-1)|1);
+		// let ay_epsilon=f32::from_bits(angles.y.to_bits()&!((1<<23)-1)|1);
+		let body=Body{
+			time,
+			position:strafesnet_common::integer::Planar64Vec3::new(p)+self.camera_offset,
+			velocity:strafesnet_common::integer::Planar64Vec3::new(v),
+			acceleration:strafesnet_common::integer::Planar64Vec3::new(a),
+		};
+		const FLOAT64_TO_ANGLE32_RADIANS:f64=((1i64<<31) as f64)/std::f64::consts::PI;
+		// xy is reversed in strafe client for some reason
+		let (ax,ay)=(
+			-angles.y as f64*FLOAT64_TO_ANGLE32_RADIANS,
+			-angles.x as f64*FLOAT64_TO_ANGLE32_RADIANS,
+		);
+		let camera=PhysicsCamera::new(
+			strafesnet_common::integer::Ratio64Vec2::new(1.0f32.try_into().unwrap(),1.0f32.try_into().unwrap()),
+			glam::ivec2(ax as i64 as i32,ay as i64 as i32)
+		);
+		FrameState{
+			body,
+			camera,
+			time,
+		}
+	}
+	pub fn user_settings(&self)->settings::UserSettings{
+		//oof, settings ignored
+		settings::UserSettings::default()
+	}
+	pub fn change_map(&mut self,_time:SessionTime,map:&strafesnet_common::map::CompleteMap){
+		self.physics_data=PhysicsData::new(&map);
+	}
+}
+
 pub fn new<'a>(
 	mut graphics_worker:crate::compat_worker::INWorker<'a,crate::graphics_worker::Instruction>,
-	directories:Directories,
+	directories:Option<Directories>,
 	user_settings:settings::UserSettings,
 )->crate::compat_worker::QNWorker<'a,TimedInstruction<Instruction,SessionTime>>{
 	let physics=strafesnet_physics::physics::PhysicsState::default();
+	let camera_offset=physics.style.camera_offset;
 	let timer=Timer::unpaused(SessionTime::ZERO,PhysicsTime::ZERO);
 	let simulation=Simulation::new(timer,physics);
 	let mut session=Session::new(
@@ -32,11 +158,20 @@ pub fn new<'a>(
 		directories,
 		simulation,
 	);
+	//load bot
+	let physics=PhysicsData::empty();
+	let data=include_bytes!("/home/quat/strafesnet/roblox_bot_file/files/bhop_marble_7cf33a64-7120-4514-b9fa-4fe29d9523d");
+	let bot_file=strafesnet_roblox_bot_file::v0::read_all_to_block(std::io::Cursor::new(data)).unwrap();
+	let mut interpolator=PlayBacker::new(
+		physics,
+		bot_file,
+		camera_offset,
+	);
 	crate::compat_worker::QNWorker::new(move |ins:TimedInstruction<Instruction,SessionTime>|{
 		// excruciating pain
 		macro_rules! run_session_instruction{
 			($time:expr,$instruction:expr)=>{
-				session.process_instruction(TimedInstruction{
+				interpolator.handle_instruction(&TimedInstruction{
 					time:$time,
 					instruction:$instruction,
 				});
@@ -59,16 +194,17 @@ pub fn new<'a>(
 			},
 			Instruction::Render=>{
 				run_session_instruction!(ins.time,SessionInstruction::Idle);
-				if let Some(frame_state)=session.get_frame_state(ins.time){
+				if let Some(frame_state)=Some(interpolator.get_frame_state(ins.time)){
 					run_graphics_worker_instruction!(GraphicsInstruction::Render(frame_state));
 				}
 			},
 			Instruction::Resize(physical_size)=>{
 				run_session_instruction!(ins.time,SessionInstruction::Idle);
-				let user_settings=session.user_settings().clone();
+				let user_settings=interpolator.user_settings().clone();
 				run_graphics_worker_instruction!(GraphicsInstruction::Resize(physical_size,user_settings));
 			},
 			Instruction::ChangeMap(complete_map)=>{
+				interpolator.change_map(ins.time,&complete_map);
 				run_session_instruction!(ins.time,SessionInstruction::ChangeMap(&complete_map));
 				run_session_instruction!(ins.time,SessionInstruction::Input(SessionInputInstruction::Mode(ImplicitModeInstruction::ResetAndSpawn(strafesnet_common::gameplay_modes::ModeId::MAIN,strafesnet_common::gameplay_modes::StageId::FIRST))));
 				run_graphics_worker_instruction!(GraphicsInstruction::ChangeMap(complete_map));

strafe-client/src/setup.rs

@@ -20,6 +20,16 @@ struct SetupContextPartial1{
 fn create_window(title:&str,event_loop:&winit::event_loop::EventLoop<()>)->Result<winit::window::Window,winit::error::OsError>{
 	let mut attr=winit::window::WindowAttributes::default();
 	attr=attr.with_title(title);
+	#[cfg(target_arch="wasm32")]
+	{
+		use wasm_bindgen::JsCast;
+		use winit::platform::web::WindowAttributesExtWebSys;
+		let canvas=web_sys::window().unwrap()
+		.document().unwrap()
+		.get_element_by_id("canvas").unwrap()
+		.dyn_into::<web_sys::HtmlCanvasElement>().unwrap();
+		attr=attr.with_canvas(Some(canvas));
+	}
 	event_loop.create_window(attr)
 }
 fn create_instance()->SetupContextPartial1{
@@ -44,43 +54,20 @@ struct SetupContextPartial2<'a>{
 	surface:wgpu::Surface<'a>,
 }
 impl<'a> SetupContextPartial2<'a>{
-	fn pick_adapter(self)->SetupContextPartial3<'a>{
+	async fn pick_adapter(self)->SetupContextPartial3<'a>{
 		let adapter;
 
 		//TODO: prefer adapter that implements optional features
 		//let optional_features=optional_features();
 		let required_features=required_features();
 
-		//no helper function smh gotta write it myself
-		let adapters=self.instance.enumerate_adapters(self.backends);
-
-		let mut chosen_adapter=None;
-		let mut chosen_adapter_score=0;
-		for adapter in adapters {
-			if !adapter.is_surface_supported(&self.surface) {
-				continue;
-			}
-
-			let score=match adapter.get_info().device_type{
-				wgpu::DeviceType::IntegratedGpu=>3,
-				wgpu::DeviceType::DiscreteGpu=>4,
-				wgpu::DeviceType::VirtualGpu=>2,
-				wgpu::DeviceType::Other|wgpu::DeviceType::Cpu=>1,
-			};
-
-			let adapter_features=adapter.features();
-			if chosen_adapter_score<score&&adapter_features.contains(required_features) {
-				chosen_adapter_score=score;
-				chosen_adapter=Some(adapter);
-			}
-		}
-
-		if let Some(maybe_chosen_adapter)=chosen_adapter{
-			adapter=maybe_chosen_adapter;
-		}else{
-			panic!("No suitable GPU adapters found on the system!");
-		}
+		let chosen_adapter=self.instance.request_adapter(&wgpu::RequestAdapterOptions{
+			power_preference:wgpu::PowerPreference::HighPerformance,
+			force_fallback_adapter:false,
+			compatible_surface:Some(&self.surface),
+		}).await;
 
+		adapter=chosen_adapter.unwrap();
 
 		let adapter_info=adapter.get_info();
 		println!("Using {} ({:?})", adapter_info.name, adapter_info.backend);
@@ -110,14 +97,15 @@ struct SetupContextPartial3<'a>{
 	adapter:wgpu::Adapter,
 }
 impl<'a> SetupContextPartial3<'a>{
-	fn request_device(self)->SetupContextPartial4<'a>{
+	async fn request_device(self)->SetupContextPartial4<'a>{
 		let optional_features=optional_features();
 		let required_features=required_features();
 
 		// Make sure we use the texture resolution limits from the adapter, so we can support images the size of the surface.
 		let needed_limits=strafesnet_graphics::graphics::required_limits().using_resolution(self.adapter.limits());
 
-		let (device, queue)=pollster::block_on(self.adapter
+		let trace_dir=std::env::var("WGPU_TRACE");
+		let (device, queue)=self.adapter
 			.request_device(
 				&wgpu::DeviceDescriptor{
 					label:None,
@@ -127,7 +115,7 @@ impl<'a> SetupContextPartial3<'a>{
 					trace:wgpu::Trace::Off,
 					experimental_features:wgpu::ExperimentalFeatures::disabled(),
 				},
-			))
+			).await
 			.expect("Unable to find a suitable GPU adapter!");
 
 		SetupContextPartial4{
@@ -169,7 +157,7 @@ pub struct SetupContext<'a>{
 	pub config:wgpu::SurfaceConfiguration,
 }
 
-pub fn setup_and_start(title:&str){
+pub async fn setup_and_start(title:&str){
 	let event_loop=winit::event_loop::EventLoop::new().unwrap();
 
 	println!("Initializing the surface...");
@@ -180,9 +168,9 @@ pub fn setup_and_start(title:&str){
 
 	let partial_2=partial_1.create_surface(&window).unwrap();
 
-	let partial_3=partial_2.pick_adapter();
+	let partial_3=partial_2.pick_adapter().await;
 
-	let partial_4=partial_3.request_device();
+	let partial_4=partial_3.request_device().await;
 
 	let size=window.inner_size();
 
@@ -196,16 +184,16 @@ pub fn setup_and_start(title:&str){
 		setup_context,
 	);
 
-	for arg in std::env::args().skip(1){
+	//for arg in std::env::args().skip(1){
 		window_thread.send(strafesnet_common::instruction::TimedInstruction{
 			time:strafesnet_common::integer::Time::ZERO,
-			instruction:crate::window::Instruction::WindowEvent(winit::event::WindowEvent::DroppedFile(arg.into())),
+			instruction:crate::window::Instruction::WindowEvent(winit::event::WindowEvent::DroppedFile("".into())),
 		}).unwrap();
-	};
+	//};
 
 	println!("Entering event loop...");
 	let mut app=crate::app::App::new(
-		std::time::Instant::now(),
+		chrono::Utc::now(),
 		window_thread
 	);
 	event_loop.run_app(&mut app).unwrap();

strafe-client/src/window.rs

@@ -15,6 +15,7 @@ pub enum Instruction{
 struct WindowContext<'a>{
 	manual_mouse_lock:bool,
 	mouse_pos:glam::DVec2,
+	simulation_paused:bool,
 	screen_size:glam::UVec2,
 	window:&'a winit::window::Window,
 	physics_thread:crate::compat_worker::QNWorker<'a,TimedInstruction<PhysicsWorkerInstruction,SessionTime>>,
@@ -24,16 +25,50 @@ impl WindowContext<'_>{
 	fn get_middle_of_screen(&self)->winit::dpi::PhysicalPosition<u32>{
 		winit::dpi::PhysicalPosition::new(self.screen_size.x/2,self.screen_size.y/2)
 	}
+	fn free_mouse(&mut self){
+		self.manual_mouse_lock=false;
+		match self.window.set_cursor_position(self.get_middle_of_screen()){
+			Ok(())=>(),
+			Err(e)=>println!("Could not set cursor position: {:?}",e),
+		}
+		match self.window.set_cursor_grab(winit::window::CursorGrabMode::None){
+			Ok(())=>(),
+			Err(e)=>println!("Could not release cursor: {:?}",e),
+		}
+		self.window.set_cursor_visible(true);
+	}
+	fn lock_mouse(&mut self){
+		//if cursor is outside window don't lock but apparently there's no get pos function
+		//let pos=window.get_cursor_pos();
+		match self.window.set_cursor_grab(winit::window::CursorGrabMode::Locked){
+			Ok(())=>(),
+			Err(_)=>{
+				match self.window.set_cursor_grab(winit::window::CursorGrabMode::Confined){
+					Ok(())=>(),
+					Err(e)=>{
+						self.manual_mouse_lock=true;
+						println!("Could not confine cursor: {:?}",e)
+					},
+				}
+			}
+		}
+		self.window.set_cursor_visible(false);
+	}
 	fn window_event(&mut self,time:SessionTime,event:winit::event::WindowEvent){
 		match event{
 			winit::event::WindowEvent::DroppedFile(path)=>{
-				match crate::file::load(path.as_path()){
+				let data=include_bytes!("/run/media/quat/Files/Documents/map-files/strafesnet/maps/bhop_snfm/5692093612.snfm");
+				match crate::file::load(std::io::Cursor::new(data)){
 					Ok(LoadFormat::Map(map))=>self.physics_thread.send(TimedInstruction{time,instruction:PhysicsWorkerInstruction::ChangeMap(map)}).unwrap(),
 					Ok(LoadFormat::Bot(bot))=>self.physics_thread.send(TimedInstruction{time,instruction:PhysicsWorkerInstruction::LoadReplay(bot)}).unwrap(),
 					Err(e)=>println!("Failed to load file: {e}"),
 				}
 			},
 			winit::event::WindowEvent::Focused(state)=>{
+				// don't unpause if manually paused
+				if self.simulation_paused{
+					return;
+				}
 				//pause unpause
 				self.physics_thread.send(TimedInstruction{
 					time,
@@ -46,35 +81,8 @@ impl WindowContext<'_>{
 				..
 			}=>{
 				match (logical_key,state){
-					(winit::keyboard::Key::Named(winit::keyboard::NamedKey::Tab),winit::event::ElementState::Pressed)=>{
-						self.manual_mouse_lock=false;
-						match self.window.set_cursor_position(self.get_middle_of_screen()){
-							Ok(())=>(),
-							Err(e)=>println!("Could not set cursor position: {:?}",e),
-						}
-						match self.window.set_cursor_grab(winit::window::CursorGrabMode::None){
-							Ok(())=>(),
-							Err(e)=>println!("Could not release cursor: {:?}",e),
-						}
-						self.window.set_cursor_visible(state.is_pressed());
-					},
-					(winit::keyboard::Key::Named(winit::keyboard::NamedKey::Tab),winit::event::ElementState::Released)=>{
-						//if cursor is outside window don't lock but apparently there's no get pos function
-						//let pos=window.get_cursor_pos();
-						match self.window.set_cursor_grab(winit::window::CursorGrabMode::Locked){
-							Ok(())=>(),
-							Err(_)=>{
-								match self.window.set_cursor_grab(winit::window::CursorGrabMode::Confined){
-									Ok(())=>(),
-									Err(e)=>{
-										self.manual_mouse_lock=true;
-										println!("Could not confine cursor: {:?}",e)
-									},
-								}
-							}
-						}
-						self.window.set_cursor_visible(state.is_pressed());
-					},
+					(winit::keyboard::Key::Named(winit::keyboard::NamedKey::Tab),winit::event::ElementState::Pressed)=>self.free_mouse(),
+					(winit::keyboard::Key::Named(winit::keyboard::NamedKey::Tab),winit::event::ElementState::Released)=>self.lock_mouse(),
 					(winit::keyboard::Key::Named(winit::keyboard::NamedKey::F11),winit::event::ElementState::Pressed)=>{
 						if self.window.fullscreen().is_some(){
 							self.window.set_fullscreen(None);
@@ -132,7 +140,16 @@ impl WindowContext<'_>{
 						if let Some(session_instruction)=match keycode{
 							winit::keyboard::Key::Named(winit::keyboard::NamedKey::Space)=>input_ctrl!(SetJump,s),
 							// TODO: bind system so playback pausing can use spacebar
-							winit::keyboard::Key::Named(winit::keyboard::NamedKey::Enter)=>session_playback!(TogglePaused,s),
+							winit::keyboard::Key::Named(winit::keyboard::NamedKey::Enter)=>if s{
+								let paused=!self.simulation_paused;
+								self.simulation_paused=paused;
+								if paused{
+									self.free_mouse();
+								}else{
+									self.lock_mouse();
+								}
+								Some(SessionInstructionSubset::Control(SessionControlInstruction::SetPaused(paused)))
+							}else{None},
 							winit::keyboard::Key::Named(winit::keyboard::NamedKey::ArrowUp)=>session_playback!(IncreaseTimescale,s),
 							winit::keyboard::Key::Named(winit::keyboard::NamedKey::ArrowDown)=>session_playback!(DecreaseTimescale,s),
 							winit::keyboard::Key::Named(winit::keyboard::NamedKey::ArrowLeft)=>session_playback!(SkipBack,s),
@@ -220,17 +237,21 @@ impl WindowContext<'_>{
 		}
 	}
 }
+
 pub fn worker<'a>(
 	window:&'a winit::window::Window,
 	setup_context:crate::setup::SetupContext<'a>,
 )->crate::compat_worker::QNWorker<'a,TimedInstruction<Instruction,SessionTime>>{
 	// WindowContextSetup::new
 	#[cfg(feature="user-install")]
-	let directories=Directories::user().unwrap();
+	let directories=Directories::user();
 	#[cfg(not(feature="user-install"))]
-	let directories=Directories::portable().unwrap();
+	let directories=Directories::portable().ok();
 
-	let user_settings=directories.settings();
+	let user_settings=match &directories{
+		Some(directories)=>directories.settings(),
+		None=>strafesnet_settings::settings::UserSettings::default(),
+	};
 
 	let mut graphics=strafesnet_graphics::graphics::GraphicsState::new(&setup_context.device,&setup_context.queue,&setup_context.config);
 	graphics.load_user_settings(&user_settings);
@@ -241,6 +262,7 @@ pub fn worker<'a>(
 	let mut window_context=WindowContext{
 		manual_mouse_lock:false,
 		mouse_pos:glam::DVec2::ZERO,
+		simulation_paused:false,
 		//make sure to update this!!!!!
 		screen_size,
 		window,

web-client/.gitignore

@@ -0,0 +1 @@
+/dist

web-client/Trunk.toml

@@ -0,0 +1,2 @@
+[build]
+target = "index.html"

web-client/index.html

@@ -0,0 +1,47 @@
+<!doctype html>
+<html lang="en">
+	<head>
+		<meta charset="utf-8" />
+		<meta
+			name="viewport"
+			content="width=device-width, height=device-height, initial-scale=1"
+		/>
+		<title>Strafe Client</title>
+
+		<base data-trunk-public-url />
+		<style type="text/css">
+			:focus {
+				outline: none;
+			}
+
+			body {
+				margin: 0px;
+				background: #fff;
+				width: 100%;
+				height: 100%;
+			}
+
+			#content {
+				/* This allows the flexbox to grow to max size, this is needed for WebGPU */
+				flex: 1 1 100%;
+				/* This forces CSS to ignore the width/height of the canvas, this is needed for WebGL */
+				contain: size;
+			}
+
+			.main-canvas {
+				margin: 0;
+				width: 100%;
+				height: 100%;
+			}
+		</style>
+	</head>
+	<body>
+		<canvas class="main-canvas" id="canvas"></canvas>
+		<link
+			data-trunk
+			rel="rust"
+			href="../strafe-client/Cargo.toml"
+			data-wasm-opt-params="--enable-bulk-memory --enable-nontrapping-float-to-int"
+		/>
+	</body>
+</html>